Viewing all customer Discussions for:

Closet

STRATO-TRACK INC. is stamped on horizontal bracing. Tracks are fine.

Hi the image is the top part of the track door and I only have one door no. Label information . The door was given to me. I would like to install it. Not sure what the name of the guide is and what track would be best so I can install or if I can remove the guide and place something else ... (cont.)

Hi. I need 2 of these please.

Cox and sons use to make it and it has bearings inside. I just need something similar.

National mfg co

I need the part that is attached to the closet door that fits into the track. The picture is what I have now.

What is the diameter of the wheels?

I am in need of some parts for half of a 1960's era bi-fold metal door. The track is 3' long !1/16 x 3/8. Not opposed to using the 5/8 track you have if it works based on these pin. Looks like I need replacement pins as well. Thank you for any information. Bruce

The sliding closet door track needs to be replaced and I can't find anything that fits. There are 3 large mirrored doors that need to roll on the convex track. The opening is 139" long. Please advise.

The part number is 4012. I really only need the nylon wheel but I don't know if it comes separately or how to install it on the assembly even if it did come separately.

Im looking for a swivel wheel that will fit the track #23-453

This is the bottom roller from a Charmac Guardian Inc. mirrored closet door. Photos of the part and the label on the door.

I need eight of these with a tracks totaling 142 inches. Thanks

Hi My laundry closet has 4 panel bifold doors. The upper track needs replacing. The closet opening is 60" side to side. I measured the width (thickness) of the existing track and it is about 22.5 mm and accepts glide pins that are 7/16" ( shown in picture ). Please advise me which part would I ne ... (cont.)

Can you tell me which track I should try to replace on my 1970's Metal Bi-Fold Closet Doors? I can't tell from the pictures if I need 21-401 or 21-452. Attached in my pictures are the doors, the track and hardware off one side of the doors.

Made by Johnson Elkhart I just need the top assemblies (4) I'm missing all of them for one closet two doors can you help thank you

I have a set of 30" JELD-WEN doors. They are all painted and ready to go but I only have one piece of track. I went back to HD but they want me to return the door as damaged so I can get another one (with Track). Hopefully, I don't have to do this again. Do you have a 30" track that is compatible wi ... (cont.)

I need the hardware minus the track

How thick is this bottom roller assembly? What's the slimmest one you have? Would be nice if you include this measurement in your pictures.

stanley 17-4264Y-050