Viewing all customer Discussions for:

Closet

I am attaching a couple of photos. Could you advise me on what I should order for 4 replacement sliding mirror door rollers and a replacement threshold.Thank-you very much.Dennis

We have a Stanley/Monarch folding mirror door. The doors don't close as they should, we are thinking we may have the gliders in wrong. Could you tell us how they should be placed on the track? Thank you!

I am looking for a bottom track for a 30" x 72" Stanley bifold mirror closet door. Photo P3140418 is the bottom track, Photo P314017 is the bottom pin close up. Photo P314016 is the center. Photo 3140413 is the label.

I don't know the name of the mirror doors that are on my closet. Hopefully you can help me with the picture of the part.

I need the rail. As you can see is very damage. Thank you

I am looking for the following Wardrobe Door Roller: Steel bracket (3-3/8" H x 1-1/2" W), Two slotted mounting holes, single plastic wheel (0.930" Diameter), w/ adjustable lever to raise and lower the door. PN: J673 - Front Roller: 1 - 3/8 PN: J674 - Rear Roller: 3/4"

I am looking for LB with 3/4 offset. Any chance?

The wheel appears to be 15/16. The bracket it 2 and 3/16 long and 9/16 deep

Need all 3 parts shown in photos. 2nd photo need the part connected to door only No names, numbers or markings

Hello could you please assist me with getting the right track. I need to replace the floor track. It is a Stanley mirrored bypass closet door. There are two doors. The opening is 58 3/4. Thank you!

The length is 5 1/2 inches including the plastic cap and metal hexagonal base. There are no markings. Will send more detailed pics if needed.

We have a Breckenridge RV with D&W Industries Tri rolling mirror doors. The design was flawed from the beginning. Doors are way to heavy to carry weight from above. I wish to replace all the parts, top rail as a guide system, and bottom rail to carry the weight. Any suggestions would be appreciated. ... (cont.)

My cousin lives in Radnor, PA, and I am helping her replace broken hardware on sliding bypass closet doors. This is a then-modern-style 1950s custom house with many built-ins, fixtures, and hardware from that period. There are perhaps 18 sliding, bypass closet doors with unusual roller assemblies ... (cont.)

I have been reviewing several submissions for people trying to find replacement bottom track for Monarch closet doors. I have looked at several of the tracks that you have recommended and several appear to match except for width measurement. The 23-270 looks like it would match except the width on ... (cont.)

sliding mirror door for a bedroom track 2 1/2 ft by 96 inches is 8ft longsliding mirror doors i need the track for it 2 1/2 ft by 8ft

Please show me steps on how to install and the exact position of bottom guides on each mirror door. Do I remove doors to install bottom guide? The top roller guides are OK.

bypass door 3/4" offset 3/4" round edge wheel made by sterling originallyI need 4 of theselooking at other wheels that are round edge mine is not AS round and wonder if your 23-003 would work?

Hello, Can you please help me identify and get pricing and availability on this part?I need 10 of them. Please let me know when you can. Thank you.

What I believe I need are the pivot guides and guide pins for National Bifold Doors louvered metal doors. They both appear to be around 4 2/2 inches long. The pivot guides appear 1/4 inch wide while the guide pins appear maybe 3/16 inches wide (or vice versa, the guides that slide are the smaller di ... (cont.)

My handyman didn?t completely get the idea of bifold doors. The pivot he put in works great, but no track. Can I buy the track and pivot hardware and install it to the side without dismantling his work? Am including photos. Please note that he built the door with little clearance, so the track can? ... (cont.)