Viewing all customer Discussions for:

Closet

Hello, I am looking for the most cost effective option for door pins and guides for the bi-fold closet doors in the images attached.

I need a new one it from the bottom of the sliding door. It has the number 4050J on it

I need a top and bottom 60 inch white track for these mirror closet doors.

Hello,I want to install MDF sliding doors (non-mirrored) in my master bedroom closet. Currently, there are no doors, but there is an upper track (see attached photo) which doesn't appear to be designed for a hanging roller mechanism. Your bottom-mount roller mechanisms for mirrored wardrobe doors ar ... (cont.)

Nylon roller appears to be 1 1/4", but could have been larger originally. There are no other markings on the doors or the rollers other than the above label. Examining your pictures, the 1 1/4" and 1 1/2" look as if they may be interchangeable. Is that an accurate assessment? I noticed that the 1 1/ ... (cont.)

missing one bottom post, doors keep coming off track.

It was in a Charmac Inc mirror closet door. The roller only has a US Pat #4850145. Another marking is "THM".

We have a closet with three-panel mirror doors. The doors are more than 90 inches tall, four feet wide. The opening is 12 feet wide, and each track is 1-7/8" wide. The track is totally destroyed. What do you suggest?

64564-001 top bracket with single rollerIs 222b a universal replacement for top and bott? I only need the top for now.

Please help us identify the right product parts for this and make the order.SteveThanks a lot.

Have a set of old circa 1991 I believe monarch mirror sliding closet doors. Track is shot and seen better days other than that I cleaned the rollers good and they seem to spin ok. What track would work for this old setup?Also, this has the concave wheels which I would like to replace as well, see at ... (cont.)

This came out of the top of my bi-fold closet door. It should have a metal ball bearing in it that when you close the door, the bearing catches on a metal plate mounted on the top door jam. It is 3/4" in diameter. It threads back down into the top of the door. The bearing apparently came out and ... (cont.)

Hi I'm looking for 4 of the nylon guide wheels that run in the track. Hopefully you can help me with this. Also 4 of the spring loaded "pins" that push fit into the top and bottom of the doors

Hi, I would like to replace all the weatherstripping for our windows. I don't know the make or model number of the windows. I think they are the original window from the late 1980s when the house was built. The locks for the windows are: 17.19.32.200 ENTRYGARD CAM LOCK

this pin is a shade under 4.5 inches long the cap is about 5/8th

Hello, I am looking for this piece for 1993 bi-doors. Can anyone help me? Thank you.

need 4 leigh...front three quarter rear I three quarter

I've been looking at many sites to try and find a replacement part of this. I suspect it was intend to be used as a top hanger part but is on the bottom of the door and runs in a track on the floor. Any ideas? Thank you.

Can't find this part anywhere.

Hello, I have large mirrored closet doors with these rollers on the bottom that need replcement. Can you tell me which are the correct replacement? Thank you, Kimberly