Viewing all customer Discussions for:

Closet

no names, numbers or markings available.

This is a ramtrack product. I need 2 of them. Thanks

72 inch sliding glass door track . The doors are stanely / monarch.. I only have the bottom track pick the top is about 1.5 deep and 3.25 wide...

Hi Swisco, Can you advise as to the rated weight for one of these , please. I have heavy sliding doors and want to order the correct amount per door on consideration of the limit for these 23-070 assemblies. Thank you Swisco, Regards Shaun

Hi. My home was built in 1963. It has many bi fold doors. These plastic pieces are wearing out. Do you have anything similar? Thanks

No part numbers or markings on the part. 1 1/4" nylon roller but they are old and broken. I don't know if it's possible if they were 1 1/2 or 1 9/16 and have just worn down. Looks like 23-043 but is only 2" long vs 2 7/32", offset for bent flange at top is 5/16 and not 5/32, also rivets are reversed ... (cont.)

Relplacing broken sliding mirror closet . See picture.

Are the alighners opposite each other with both having the same height from the floor or is one slightly above or below the other allowing one to rest on the other when the doors are closed? Thanks, Richard

Don't know what to enter

No part numbers. Does have Mfg mark AFC In a circle. This is for a bypass door. I have eight bypass doors needing hardware replacement. Unable to find replacement. Do you have replacement available? Thank you.

I am looking for a replacement part (attached pic) for a bifold door. In your website it appears to be part 21-044 with the exception of the length. Our part is 4.25". Perhaps the length doesn't matter and it can be longer. My Mom thought she placed an order for these last July and we did out it o ... (cont.)

Need to replace the four Kenna Track Closet Door Hangers on a 2 door built in linen closet in the master bathroom. The nylon wheel on the pictured hanger is very loose and will not stay on the track. Below are pictures showing the dimensions. It appears that the offset is 1/16". I look forward to ... (cont.)

I am looking for a replacement part to this piece for my sliding closet door mirror. The door itself was made by the Charmac Incorporation. One of the plastic guides broke from the top of the mirror, so I am attempting to get a new one.

Looking for help with bifold hardware need the top assembly spring mechanism along with pin that goes in the door as well as the pin that goes in the bottom of the door that goes in the track. Pictures attached. Thanks

Hi,I'm looking for a track and rollers to replace those pictured. The ones I found on your site seem to be too narrow. I'm looking for the space of the rolling part of track to be about 2 in apart.Do you have a track that fits these doors and is 72 inches in length? Thank you, Dan ... (cont.)

Looking to match existing handles installed on wrong side of sliding glass mirroed wardrobe door.

Does the swisco 23-222B replace the Stanley 00-5024 ?

I have 2 set of mirrored bi fold doors that are about 10 year old and I need to replace some hardware on the doors this is the number I located on one of the door 1114002 243873 they are Stanley Monarch Mirrored doors if you can tell who I can purchase it from if they are still able to get Donald ... (cont.)

We have sliding Closet Doors using N-6630 rollers on a bottom track of approximately 3.5" wide using a grooved roller. I need 2 tracks at 72" long and 2 at 60" long.We have only owned this house for 3 months and do not know the source of the original parts. Do you have the tracks? Jack ... (cont.)

Bi-fold door is about 30yrs old. I am unable to locate this exact part. Do you carry it or have a similar part. I am concerned because of the circle of indented metal on the screw. Entire length is 2 inches. Width of center circular bottom is 3/16 & larger circle is 10/16. Thank you. Sue ... (cont.)