Viewing all customer Discussions for:

Closet

Looking for help with bifold hardware need the top assembly spring mechanism along with pin that goes in the door as well as the pin that goes in the bottom of the door that goes in the track. Pictures attached. Thanks

Hi,I'm looking for a track and rollers to replace those pictured. The ones I found on your site seem to be too narrow. I'm looking for the space of the rolling part of track to be about 2 in apart.Do you have a track that fits these doors and is 72 inches in length? Thank you, Dan ... (cont.)

Looking to match existing handles installed on wrong side of sliding glass mirroed wardrobe door.

Does the swisco 23-222B replace the Stanley 00-5024 ?

I have 2 set of mirrored bi fold doors that are about 10 year old and I need to replace some hardware on the doors this is the number I located on one of the door 1114002 243873 they are Stanley Monarch Mirrored doors if you can tell who I can purchase it from if they are still able to get Donald ... (cont.)

We have sliding Closet Doors using N-6630 rollers on a bottom track of approximately 3.5" wide using a grooved roller. I need 2 tracks at 72" long and 2 at 60" long.We have only owned this house for 3 months and do not know the source of the original parts. Do you have the tracks? Jack ... (cont.)

Bi-fold door is about 30yrs old. I am unable to locate this exact part. Do you carry it or have a similar part. I am concerned because of the circle of indented metal on the screw. Entire length is 2 inches. Width of center circular bottom is 3/16 & larger circle is 10/16. Thank you. Sue ... (cont.)

Hi friends,We are facing difficult times with our metal doors in two of our buildings. We are a non profit housing organization called MTR - More Than a Roof Housing Society and we wanna replace our tracks and pins (not the metal doors) by new ones, probably different ones... Today we use parts like ... (cont.)

Unknown manufacturer of the cabinet door, found one sticker on mirror from Gardner Mirrors. I am looking for 4 replacement rolls and how to install them. Thank you.

I am looking for new slider wheels from 1950s era closet doors. The rubber has warn down on many as shown in picture.

Hi we need to replace our closet door track, I have attached pictures of our current track. I think product code 23-271 is the one we need can you please confirm this? I really appreciate your help and time, thank you

Stanley Part No. 00-5024

Closet door came off track Hardware that holds door in place at the top of fixed side seems to missing a piece Does not have a spring action to hold in place Have taken door and hardware to various stores and no one has this older hardware

bottom track roller guide replacement part pictured

looking to replace the full assembly the pic is of whats in the door now. We need 8 in total for all the doors. hopefully you have the part or can direct us on how to replace these Thanks

Please help to find a replacement parts

Project 78-5038, Date 4-13-78. The information is listed on the label still - as you can see in the picture, the actual roller has cracked and chipped so the door no longer slides. Need help identifying the correct replacement.

Patent # on part is 2610367 wheel is 3/4" across I need 2 replacements for end of Door wheels. what part # and how much to order it?

The part is from an interior mirrored closet door purchased from Home Depot some years ago. The part has "Contractor's Wardrobe" written on it. Do you have a replacement part? Thank you, Mary

Hi old 1971 bypass mirror doors the fork which is nylon broke off thanks