Viewing all customer Discussions for:

Closet

I'm trying to identify these closet door rollers. The bearing in them is completely worn. I haven't been able to identify any manufacturer or dates, but they are original to the house built in late 1960's.

Looking to obtain replacement part.

Looking for 4 replacement closet door rollers with screws. See attached photos.

I have a folding door 93" x 35 1/2' I nee harware to reinstall

Thank you.

Hello! I'm trying to replace the frame connector bracket on an old mirror closet door. This is a bracket at the top of the door that holds the top rail and the side rail together. Any help would be greatly appreciated!

I wonder if you have any idea where i can fine these types of rollers. They are for 1 3/8 solid doors and the wheel on a particular roller won't free up. But I dont know the offset or if I can even find these anywhere

Need Hardware as shown in the pics for the door

I did not remove these but with the design, it looks like these would be bottom mounted.

The bottom track of these doors was accidentally thrown out during a remodel and I need a new one asap. They probably date back to the late 1970s when the house was built. The only brand label I can find on them is ACI Glass Products. The first three photos are of the doors and the last two are of t ... (cont.)

Circa 1972. Need 4 please

Hi! We need a replacement bottom track and rollers for these mirrors. The rollers were damaged and the track was thrown out during a recent renovation.

Attached is a top pivot bracket that goes into a track. I am guessing these parts are 25 plus years old. I did not see this on your wed site and the pieces my wife had me order were not correct.

This part is for the front door bottom pin to slide in the track.

Need the plastic cap for a metal bifold door top pivot. The metal pin in 5/16" in diameter and 5 1/4" long. There is no spring between the metal part of the door and the lower collar of the plastic cap/guide. the plastic cap/guide ID is 5/16", the diameter of the cap that rides in the top rail is 3/ ... (cont.)

Good morning the snugger you suggested does not match mine. Please see the attached pics. spring length is 1.5" plastic carrier is 0.75" one side is open and the other is curved downward thank you for the help!!!

Thank you.

Greetings all, I'd like to ask for assistance in identifying the correct part(s) and numbers. This is bottom pivot pin from a metal bifold door (2 panel), manufactured in 1962. I need a cap, or a whole kit reference from your catalog. I can provide more photos with the measurements (in mm) for this ... (cont.)

Sales, I have an older closet mirrored by-pass doors. A set of rollers has gone bad and I am unable to find replacement rollers. I am not looking to replace the whole wheel assembly. I am reaching out to manufacturers since I have not found this particular size in retail stores. I’ve attach ... (cont.)

Hi we are trying to find a match for these rollers, that are no longer working. The doors we have are really big and heavy. Help would be greatly appreciated.