Viewing all customer Discussions for:

Closet

its from a sliding mirrored closet doors.Not a whole lot of info other than the markings seen in the photo.

I need to replace the attached closet door hardware. Leigh and Monarch 5/16" track aluminum Bottom track .... total missing , 3-6/0 , 29-5/0 , 13- 4/0 , 9- 2/6 , 40- 1/6

do you sell replacement tracks for the Benchmark brand of Bi-Fold Steel Doors? They use the Product Code: 21-044 style pin. In addition to the track, I also need the plastic pin grommet/guide which snaps into the door and the pin goes through. I have multiple sizes of the door, this particular on ... (cont.)

This part came off an bi-fold door with a metal frame. It is mirrored. The bushing appears to be missing and allowing the pin to wobble and of course, fall out of the pin holder on the bottom of the floor.

I have 1 broken panel (glass cracked, panel frame bent). My hardware is fine as are the other 2 panels and track... I would like to just buy a new panel and reuse my same rollers or with new rollers... anything that will allow me to get a new panel in without replacing the entire system. Anyone know ... (cont.)

This is the top rail for a sliding bypass mirror closet door in an RV. It fits your 23-027 roller hanger. The doors hang off the rollers, with a floor guide. The rollers are 7/8" diameter, with a 1 1/2" spacing. Need a new 6 foot top rail. thank you John T

I need help getting a replacement bracket for my closet door. I can't seem to find the right part anywhere.

I need to remove the closet door how do you unhook the wheels from the bottom track?

Hello, in need of replacement guide see photo

The offset is either 7/8 or 1". Can't find any with this big of an offset. Let me know if you have anything like this.

Can you identify the part number for this type wheel? I don't actually need the whole assembly since the wheel bracket can be removed. Thanks.

We are trying to find a pair of replacements for the part shown. "Scottie Kennatrack" is imprinted on the side of the roller. The closet doors may be original to the house, which was built in the mid-1960s.

This is for a mirror closet door.

I have a US Plywood metal bifold door and I need replacement pin caps. The pin is 5/16" in diameter and therefore requires a cap with a 5/16" inner diameter. Do you have any images of the pin without the cap, or the underside of the cap? Is this pin entirely 5/16", or is it a smaller diameter u ... (cont.)

Hi my name is Ron I'm looking for some hardware for a set of closet doors I need the roller assembly or wheel assembly and also the top guides that are plastic that snap in place

See picture of bottom roller from mirror wardrobe doors

Hello, I have Slimfold Bi-Fold Doors that came with the house when it was built in 1988. The metal pin that I have has what looks to be threads at the bottom of the pin. I need to replace the top cap that fits on the metal pin that broke yesterday and runs along the track when you open and clos ... (cont.)

This roller is 1-1/2 inch, concaved roller, I can't find them anywhewre. Please help.

Please help me find this roller, or an replacement.

I am in a house that was built in the fifties. It has closet doors using your parts. The doors are hanging up. I haven't been able to find replacements. I am attaching pictures of the rollers and track.