Viewing all customer Discussions for:

Closet

Your bifold Door Pin Cap # 21-108; will it serve on bottom track to hold dor pin in track? Does track need to be removed to place Pin cap?

I need a replacement Chrome handle. Can I paint the cream colored Plastic Pull (22-020)? Brenda

What is the weight limit of Product Code: 23-135? I have replaced the pivets on my doors twice due to the nylon collar breaking I need something that will last.

I have several closets that need the wheels replaced. The assembly looks similar to your product #'s 23-198 and 23-043. My assembly has a logo of the globe with "ACE" printed in the middle. How do I select the correct assembly? Although the wheel axels are riveted, I have the ability to remove t ... (cont.)

I have a customer looking to replace the part shown in the pictures. I have looked in your catalog and don't see it. Am I missing something? Thanks, Rick

Hello - I need to replace some old Sterling door hardware....there is a "C" on the hanger....Sterling part may have been 0400-C. The wheels are 3/4" and the offset is also 3/4". I have inserted some pictures. Thanks for the help. I need a dozen or more pieces...unfortunately, it's urgent. ... (cont.)

Hi, You label the hinge 23-401 as brasstone. We are looking for non-shiny brass hinges, something more like an antique brass. The photo looks like what we want, just wanted to make sure. Thanks, Sue

I found the 1/4" and 1/2" offset. Do you have a 1" offset??

I have a two 20 plus yr old 29 1/2 X 78" (actual), 1-1/8 wide steel frame bi-fold mirror door made by Monarch. I'm looking for the top and bottom post that were 1/4-20 x 1-1/4 long that went into a 3/4" wide track. The door frame has press fitted 1/2-20 nuts for the posts to screw into which can be ... (cont.)

I have 2 sets of Stanley / Home Decor Innovations mirrored bifold doors. The model number is 24-8282. I am trying to find parts for these doors to install them. I need the tracks (upper and lower) and maybe a few other parts. If you can help if would make my wife a happy lady. Thanks ... (cont.)

I have a back mounted 3/4 inch wheel with a 1/16 offset bipass closet door hanger that is at least 45 years old. I found a similar style hanger made by Kennatrack scottie but the wheel is 1 inch. Can someone help me locate where I can buy 12 sets of the 3/4 inch wheels. Thanks.

Hello! I am looking at your pivot hinges for closet doors. I am replacing a house full of old ugly louvered bifold closet doors. I would ideally like to replace them with flush hollow core doors on pivot hinges to achieve a more modern look. The hinges I see are labeled for bi-fold doors, but as ... (cont.)

Does Product code # 23-041 require 'specific' screws,bolts or nuts in order to mount correctly? Thank you. Shirley

I have a set of doors in my kitchen that are in front of a food pantry. I am not being successful in putting the doors back up. For For some reason the doors seem to be dragging on the bottom when being opened or closed. I have purchased pivot pins in the past but nothing seems to work. Springs ... (cont.)

I am looking for gravity pivot hinges to use with full size 80" doors that are 15" wide and 1 3/8" thick. I don't have a ton of wiggle room under the door or above it if I add it all together. How much space would be needed floor to door and top of jamb to door for the 32-064 hinges to fit and fun ... (cont.)

Hello, I have a set of Leigh Full=Vu metal bi-fold doors at my furnace closet. The opening width is 42 3/8 inches. each panel of the door is 10 1/8 wide and each door total is 20 3/8 inches by 78 1/2 inches tall. The doors appear to be in good condition but most of the hardware is either missi ... (cont.)

I am hoping you can help me ID a part that would connect our wood bifold closet doors with the track above them. I don't see any company markings identifying the brand. Attached are photos of the hole in the door from where the relevant part appears to be missing (approximately 1/2" diameter), t ... (cont.)

I have a non-operative Benchmark door and looking at your website, it appears I need to replace both my 21-044 guide pins. However, how do I install and adjust them? A drawing or parts diagram would be helpful. Do the plastic tips on the 21-044 ride inside the track or on the surface of the track ... (cont.)

How do you put a new top pivot bracket (like the 23-302) onto an existing track of a bifold closet door. The old top pivot bracket was partly plastic and broke. I cannot figure out how to install the new one without taking the track down, which I would prefer not to do. Is there any other way? ... (cont.)

Are the plastic inserts (wheel and screw) inside the metal brackets in 23-225 and 23-199 the same size and interchangeable?