Viewing all customer Discussions for:

Closet

We're looking for Bifold Door Top roller guides smaller than what we're finding at DIY stores, we need a smaller roller, apprx. 1/8" tall and a little less than the 7/8 OD Would you have anything or can you refer us somewhere ? Pls. advise, Robin S.

I understand that the bottom roller unit (17-4264Y-000) is no longer available in USA. Can your 23-225 bottom roller assembly adapt? If not, do you have any other suggestions? Thanks Ellen

Is that product coming in a pair or just one item? Thanks in advance!

Hi I'm not sure what this is called, they go at the top of my closet, and it helps the doors stay shut. Both of these are broken and I want to get some replacement ones. Can you help me? Thanks.

Dear Sir or Madam: Attached is a photo of a closet roller I am trying to match. Can you help me? Thanks! Sincerely, Steven

I see from the other threads that this does a good job of replacing the ACME 4012 and 4011 rollers. My question is.. does the wheel wobble on the rivet? My doors tend to roll off the track because the wheel wobbles so much on the rivet. This seems to be caused by a loose rivet Also the bi-pass d ... (cont.)

I need to replace my sliding closet door tracks. The track are at least 20 years old. The doors have mirrors on them and are 4 feet wide by 8 feet tall. Because the tracks are so grooved and uneven the doors come of the track often and just make it worse. I am wondering if the 80-102 track topp ... (cont.)

Hi, I'm remodeling a home. Closet doors I believe were made by Diston Industries (1980's) They are top rollers. Need the bottom plastic piece that sits in the bottom track. Have attached two photos. Thank you.

Good morning, I need lower guide/bushings for bifold closet door lower sliding pin. I have attached an exhibit for reference. This is not for door pivot hardware. It is for the sliding portion of the bifold door which rides in the lower track. I also need a pair of shower door lower clips. Is ... (cont.)

Help. I have been looking for parts to match these. i havent been able to make anything i have tried fit. please help me fiure out what i can make work. I need 6 more pieces to finish the closets in my house. The roller is approx 7/8" diameter and has a concave wheel. the attached photos are take ... (cont.)

I have a broken wheel on a mirror closet door. The door roller is very similar to your 23-064 but he bottom piece to fasten in is horizontal instead of vertical. It has ACE on the wheel. The measurement on the top piece that fastens is 3 3/8" and on the bottom is also 3 3/8"

We have a broken sliding door bracket which I have attached, I cannot locate a name on the door. It looks like more like the metal bracket for your part 23-041 but the inner working from your part 23-199. What would you suggest would be the correct bracket to buy for this. Thank you, Tina ... (cont.)

The 23-199 looks and measures like the rollers I need. I see no picture of the other side that I can also compare. Are there two tabs that point upward that insert into the bottom frame of the door? 5/16" height, 1/4" width and centered 11/16" apart.

We moved into a house that has the metal Benchmark bi-fold closet doors and they are a mess. They do not close at all properly and have made some observations. I noticed that the bottom stationary pivot pins, I believe the 21-002's are not inside the pivot bracket holes,but they should be correct? C ... (cont.)

I reciently purchased a set of mirror door rollers from you (#23-198) and they are way to large for my application. I was hoping to get some help finding gthe right part. The roller assembly I need goes on the bottom fo my wardrob mirror door in my 2000 Fleetwood Discovery motorhome. It's very simyl ... (cont.)

I could not find a contact us category which was for a question. They are all so specific... so I'm just going to borrow this one. ok, can you tell me if this door guide is made from sturdy plastic or does it bend? Product Code: 23-204 my carpet installers installed door guides which i ha ... (cont.)

I am looking for some replacement closetdoor wheels for a customer. A year ago I changed out her 2 other closetdoor wheels and all doors are original and the house was built in the late eighties. I was able to find the replacement wheels in Home Depot but a year later they did not have them and I ch ... (cont.)

I need this part for my Bi Fold metal door but i didn't see any spring in assembly. do we need to buy the spring sprate and what about the bottom of the door do we used same assembly. My door is Leigh and part number is 8433 because i saw paper on the door. I need help to find the right part . Waiti ... (cont.)

What is the height of the 23-205 floor guide?

Dear Freind, I'm looking for a hanging roller for a large mirror closet door. The attached photo was the best I could get. The bracket actually afixes to the door frame by sliding in two slot in the door frame.