Viewing all customer Discussions for:

Closet

Product 23-070 is thi for just the roller oar the complete unit? Also can you ship to the UK?

I have a 30 yr old home that has Stanley closet door hanger hardware throughout. The plastic part for adjustment is deteriorating with age. Everything else is fine. Where can I find the white plastic wheel that adjusts the door elevation? See attached photo:

I am replacing the hardware on my closets and doors and was wondering if these hinges come in a siver color?

a home owner is doing some remodeling and rather than purchase new bi-fold doors she would like to reuse the benchmark steel doors. she has laid new flooring and would like to not use a bottom track but perhaps a side mounting bracket that the pivot can function in with no bottom guide. Can you te ... (cont.)

I have a bypass, mirrored closet door whose wheel broke. I pulled the mechanism and the measurements match one of your items. However, I would love verification if possible. The door was manufactured by Monarch Industries/Olander. Any help you can provide would be appreciated. Thank you! ... (cont.)

I need to replace the plastic rollers on my sliding mirrors and I can't find the right one. I have attached some pictures and measurements. Thank you for your help.

What guide track is used with Product Code: 23-158 tricycle trolley and can this product be used for a bifold door? How much space/clearance is needed to install both; or the difference required between the door panel height and the door frame height? My panel height is 79 inches and the panel ... (cont.)

Though I remove the screw, I can't seem to get the roller mechanism out!. It seems "sandwiched" in the frame. How do I get it out? My roller looks like item # 23-198

I can't get the old cox roller out of the sliding glass door. I have removed the two screws, but can't seem to get the old roller out. Any help would be appreciated. Ollie

We put these doors in the late 1980's and the plastic wheel has broken. jWe took the door off and removed the roller but were unable to find a replacement at Home Depot, Lowe's or Ace hardware. Nothing seems to attach like these do. They attach to the frame on the side of the door. Do you carr ... (cont.)

Wher might I find this size for sliding 1 1/4 inch wide wood door? Thanks! Tom

My bottom roller size is approximately:wheel diameter 1and 1/4 inch,width 1/4 inch mounting strip width 7/16, mounting wheel separation 2 1/2 inches. these match with your product # 23-218 but your roller wheel is made of nylon, the one i have is metal. the wheel is for metal door 79 1/4 hig ... (cont.)

I am building a closet and will make a set of wooden framed sliding mirrored bypass doors. The closet would take a 6' set of doors. I am trying to find the right hardware combination between the upper and lower rollers along with the top and bottom tracks to match. Would you have a combination or k ... (cont.)

I need a part almost idential to the 23-043, with the following exceptions. Where your measurement along the bottom = 2 7/32, mine = 1 7/8. Where your depth = 1", my entire wheel diameter is 1". My width (thickness) at widest part = 9/16. This is from the sliding closet door in an RV, if that ... (cont.)

Your bifold Door Pin Cap # 21-108; will it serve on bottom track to hold dor pin in track? Does track need to be removed to place Pin cap?

I need a replacement Chrome handle. Can I paint the cream colored Plastic Pull (22-020)? Brenda

What is the weight limit of Product Code: 23-135? I have replaced the pivets on my doors twice due to the nylon collar breaking I need something that will last.

I have several closets that need the wheels replaced. The assembly looks similar to your product #'s 23-198 and 23-043. My assembly has a logo of the globe with "ACE" printed in the middle. How do I select the correct assembly? Although the wheel axels are riveted, I have the ability to remove t ... (cont.)

I have a customer looking to replace the part shown in the pictures. I have looked in your catalog and don't see it. Am I missing something? Thanks, Rick

Hello - I need to replace some old Sterling door hardware....there is a "C" on the hanger....Sterling part may have been 0400-C. The wheels are 3/4" and the offset is also 3/4". I have inserted some pictures. Thanks for the help. I need a dozen or more pieces...unfortunately, it's urgent. ... (cont.)