Viewing all customer Discussions for:

Closet

I need replacement rollers for my sliding glass wardrobe door

I have two sliding glass closet doors that are 2' wide each. The rails were cut to 3'. I need 4' upper and lower rails. The lower roller assembly is marked with 4011 & 4012. The upper assy. is 17-4116. I just need upper and lower rails at this time.

The part I'm seeking is pictured and has W1-1325-2 marked on the side.

Looking for top and bottom pivot for a metal bifold door with mirrors . 24" wide

Good afternoon. I need help identifying this "bolt" or some type of reverse shoulder screw. Can someone assist? The threads are 1/2-20

Pulled this out of my closet door setup and am trying to locate replacements. Nothing online looks similar. Thank you!

I need 4 of these

Need 72 inch lower track for rolling mirror doors on a closet

Rm-g1003 plastic top flat slide top 2 per door I have roller on bottom track

I am looking for 69 inch sliding mirror door top tracks ( white) .

Need track replacement for heavy closet doors (mirrored).

Looking for top piece that broke to hold door on and slide it

I HAVE A MIRRORED STANLEY ACME BIFOLD DOOR. THE PART IN THE PICTURE COME FROM THE BOTTOM OF THE DOOR, ITS BROKEN, WHERE CAN I GET A REPLACEMENT

Plastic/nylon piece that slides into the hardware

I have several sliding doors made by Charmac that I need replacement wheels for. Would you have anything that would match?

We have a 90s style bifold door...2 sets for a bedroom closet. We have the original metal track. When we bought a new hardware set, the bumper doesn't fit in the track. Some people call it a Snugger as well. It's the little spring that sits in the middle of the track to keep the doors from popping o ... (cont.)

I'm looking for the bottom track guide that slips into the door channel frame. Inside channel frame is approx 9/16". The photo of the top roller might be of use to see how the bottom guides slot into the door frame. Any help would be appreciated.

Looking to replace sliding closet doors hardware

Hi, We are looking to replace hardware for our metal mirrored bifold closet door 3' opening. Attached is a photo of some of the hardware pin & slide. The door has to tracks top & bottom and was installed in the 1980's. Thank you. Rodger & Ivy

Need help ordering correct parts for closet bifold door track.Old track is on right in photo, new track is on left. Bracket does not fit into either track.Do you have a bracket assembly that would fit onto the old track on right?The old assembly is both metal/plastic and is broken.New brackets purch ... (cont.)