Viewing all customer Discussions for:

Closet

What is the inside dimension of the top track (or wheel diameter) and depth (looking for a 1/2") of the 23-509? Thanks

Hello,I need to purchase 2 bottom guide rails as you see in the attached photo and also two top guide rails for the same. Would appreciate knowing if you have these in stock and of course the part number for me to order. Thank you.I should have mentioned Monarch Sliding Glass Mirror Closet doors. D ... (cont.)

Attached are pictures of the rollers and the existing track which is needed to be replaced. The current track is 91.5 inches long. Do you have a replacement rack to fit? If so what is the part # so that I can place an order?Thanks,Dave

There's no markings but where can I find this part

Need to replace the bottom rail for a Monarch Sliding Glass door. Existing rail is 70 1/2" and 3 1/8" wide. Closest Swisco bottom rail found is the 23-272 track used with the 23-028 roller that could work. What other bottom rails is a better fit without modifying? Existing bottom rail has a wo ... (cont.)

We are looking for replacement pins for these bifold doors they are about 50 years old

Below is a photo of the hanger that mounts on the top of a Monarch Sliding glass mirror closet door that has inexplicably disappeared from my door.

Hello, I'm looking for Stanley 4013-1 and 4013-2, can you advise where to buy them, please, thank you.

I own several condos in a condo complex that all have metal bi-fold closet doors. Many of the guide rods are missing at the top and bottom. I'd like to replace all the ones that are missing and purchase a few more to keep if anymore should go missing. I'm not sure which rods for either the top or bo ... (cont.)

All of the measurements listed on your site appear to match the roller assembly I am looking to replace. Although the inner parts look different, the rest of the measurements all align. There were no measurements however where the mirror sits on the roller and the 2 tabs. I want to confirm it will ... (cont.)

I need all four top corner brackets with the wheel attached so it goes into the rail and I need four of the bottom corner pieces that attach to the bottom rail. I don't know where to find these to purchase. Thank you for your help.

How do u install the 23-215

I'm needing to replace the bottom track of my beveled mirror sliding door on a closet, 48 x 80. It was purchased in 1989. The doors are still in GREAT shape, but the bottom track has "seen better days". The label on the back of the door shows The Stanley Works, P.O. Box 1840, New Britain, Ct. 06050 ... (cont.)

I am replacing the hardware on my Benchmark metal bifold doors. A couple of questions. I know already that I need one pivot pin (21-002) and three top pivot/guide pin (21-044) per door. However, I also need to replace the track for two of the doors. Which part is this? And which guide pin do I need ... (cont.)

I'm looking for another set of floor guides to match what I have (I need 2 sets but can only find 1). I'm hoping to not have to drill any other holes in the hardwood floor. The doors are not normal thickness, more like 3/4" plywood. Please let me know if you have anything that would work. I found ... (cont.)

Good afternoon from Australia - wondering if you can cast your eyes over the images and confirm the part number for us please

I have the Stanley works 5 foot mirrored bypass doors. The roller assembly 23?041 is the perfect fit for the bottom door I am just unsure of what track I would need that would fit those bottom rollers

Could you please tell me if you have-or can trace-5 sliding doors rollers part No.: ACME 4012X-1 ? Thank you,Dr.A.Hahn

Looking for replacement of bottom roller assembly for ACME #4011, the 23-041 looks like a close match.

The correct pin for bottom float away is 21-033 I ordered 2 tracks, which are narrow (1/2 ") wide instead of 1" wide. I need part number for 1" wide and 7/8th high track , I also need correct part number for the pivot bottom pin. The one I ordered did not work. I have received the following items a ... (cont.)