Viewing all customer Discussions for:

Closet

Part number marked on this is 005024, can you tell me if part number 23-222B is compatable?

As one can see from the photos the top part of the plastic top pin has broken. The brackets attach to the plastic pin hold and hold the pivot into a heavy extruded aluminum top channel. A an replacement would be great or recommended alternative. The dimensions of the brackets are 1 1/4" by 5/8"The ... (cont.)

Roller assembly is marked as above. I need 2 replacement plastic female rollers or 2 new assemblies. Do you have something that will work. This part number does not show up on your site.

Is this part still available, or is there a replacement part that will work and fit the same?? Thanks!!

I need to replace this bracket. It's 4" long & the glide width is 1-5/8. Can you help me?

I want to convert one of my mirrored Stanley closet doors from bottom rollers to hanging rollers. Attached is a picture of the hanging roller on the doors of my hanging closet doors and a picture of the top guide on the doors I want to convert. Both doors are Stanley with similar metal frames. On yo ... (cont.)

Do you have any equivalent to Johnson Hardware 138F722D Sliding bypass door hardware sets for standard door or opening widths.

Good morning, I recently bought a pair of mirrored closet doors. The original owner had cut the bottom and top rails to fit his closet making them too short for mine. I need replacement rails for the top and bottom. The top should be easily identifiable but the bottom is stumping me. Could you pleas ... (cont.)

Our old pocket doors rollers no longer work. We want to keep the door if it all possible, and try to keep whatever original parts of the 1951 house that we can. :-) Can you help?

Hello. I need to replace my closet bi pass roller set and see that you carry the same one however it is larger than the one I need. Could you help me find the one that will fit my closet Mine is 4" 1/4 long, 6/8" wide. With a 1" diameter wheel. You carry Pocket Door Roller Pair, 7/8" Product Code ... (cont.)

Hi - I have a 1977 built house with sliding mirrored closet doors. The aluminum track is wearing through (like the wheels eventually cut it). The wheels are concave and ride on top of ridges rather than traveling in channels. The total width of the bypass doors is 6 ft. We also need to replace the ... (cont.)

What is the difference between the Mirror Wardrobe Door BB Roller,Concave 23-086 and the Mirror Wardrobe Door Roller,Concave 23-070? I know one has the Ball Bearing but can either be used? I am replacing same type but don't know if need the ball bearing or not. I believe mine doesn't have the the b ... (cont.)

Stanley part #2619 for securing upper rail/track of bi-fold door support system. Dimensions are 3.75 inches x 5/8 inches. One piece required.

Hello! Need help identifying what pivot ( the part/panel of the door hung in the middle for each of the two panel doors) I need. The track is .75 in wide, and has small lips on the bottom to catch whatever pivot is inserted. I will have to unscrew the track to add the pivots I think. Any help is ... (cont.)

I am looking for replacement parts for heavy sliding closet bypass doors from the 1950s. 1 3/8" doors. Each hanger has 2 wheels, wheel diameter is appx 3/4". On the wheel is stamped #2550, brackets say Sterling Hardware, Chicago. Are you able to identify and tell me if you have a replacement? ... (cont.)

Do you sell these screws for this handle. If so how can I purchase it?

Trying to find replacement parts for Bypass Mirror doors sold by Lowes under their in house brand Readybuilt

Hello, I threw away the closet door floor tracks early on in a remodel and want to be sure I am ordering the correct replacements. The tops of the doors just have guides that sit in the divider tracks. I believe I need the 23-241 60 inch. The wheel width is 5/16 and the whole wheel unit width i ... (cont.)

This is an old bifold closet door. The upper contraption where the door hardware is inserted into the pictures hardware.

I am looking for this SFC pocket door roller. Or a replacement that will work with my existing rail