Viewing all customer Discussions for:

Closet

There is a track That is 27 inches long. And there is a round door slide that measures 3/4 of an inch. The problem is the track is too narrow, for the slider. All I really need is a new track so The door won't fall out. I ran all over the place Home Depot and Lowe's and they don't have such a th ... (cont.)

I am looking to purchase four wheels and support for my mirror doors. The wheels I have are quite old, at least 14 years old since I have been living in this apartment and probably older. The end of the wheels are worn and it makes the sliding of the doors noisy and not smooth. I am sending picture ... (cont.)

need both metal and plastic part show in the picture

I need a replacement pivot or a replacement track.3 ft track 2 very heavy MDF Doors or a replacement track that is 36 inch long, 2 inch tall and can support 2 heavy MDF bi fold closet doors .

I am looking for a white track for the floor for my mirror sliding doors

Hello, I am looking for replacements for these, can you help? Also, are these adjustable? Thanks, Libby

I'm looking at redoing four closets in my house. The tracks are bent but hoping to reuse the doors. Do you have anything that would accommodate? THere are two closets with three foot doors and two closets with four foot doors. Can you do 96 or 100" tracks? Please let me know your thoughts. THa ... (cont.)

What are the correct rollers for this mirror door

This is upper roller on my bifold doors. The house was built in 1964. I have not found replacements for them and have several missing.

It shows COX 21-717, 21-767 and 21-718 as markings. Its very heavy, so I can't won't remove it till I get replacements. It has 2 screws, one on each side and 2 screws underneath on either side of the roller. I am looking for a replacement with a ball bearing roller.

Hi, I have attached a photo of the track I'm looking to replace. I know this is 48" L by 4" W. I don't know what's the diameter of the nylon wheel. Thank you Lisseth

Trying to find match to the original old track at a friend's home. The track is actually split and needs to be replaced. There are two Steel Concave rollers on each of the two doors that look to be in good shape and I already purchased parts for the other doors but not this one. The dimensions I h ... (cont.)

These are similar to the type called Kenna but the front is ¼" backset and the rear is 1-¼ backset and they have a concave wheel and I cannot find anything to match. The rear wheel is reversed compared to most applications. Many thanks.

Hi there Can you please help, can you supply two bottom rollers for mirror wardrobe doors as per attached pictures all the best Alan

I bottom tab is out of the groove and I need to put the tab back into the groove, is there a method i can use to push the tab into the guide rails.

I need the bottom roller for my mirrored doors. Isabel Salinas ordered parts for me from you eight years ago. The part 23-120 was brown. However, on the form it says it is a top roller. Are they interchangeable. The bottom roller on one side cracked. I would like to buy four but not sure that would ... (cont.)

Do you have the Nylon for the 81-250 product?

Looking for this parts. Thank you for you help

Swisco Experts I Need Help - 8 - Flat head screw clamps 3 - Bottom pins Thanks for your help! Any different combinations of options to make it work would also be appreciated

this is shown as an alternative, and how can you get them with the spring, to use in replacing spring loaded pins?