Viewing all customer Discussions for:

Closet

I have 3 independent sliding glass doors for my closet manufactured by Home Decor. See the attached picture. The roller is 1 7/8" diameter. There are no other markings on the door hardware other than what is shown in the picture.

Hi, I have an apartment full of these beveled mirrored bifold doors. One door has always been problematic but I don't want to replace everything just because of one door! But I have had no luck with having this repaired! Every repair person I have out says the hardware is not available and regular ... (cont.)

need single wheeler door hanger not sure how to measure off set for front door needs a 3/4 inch wheel

I'm looking to replace the 00-5024 bottom roller part for my Stanley mirrored wardrobe doors. One of the plastic wheels is broken and the door will not slide properly. If you don't have this part can you suggest a replacement?ThanksJulie

Looking for a bi pass roller 1 1/8 " wheel and 1/4 off set

I'm looking for this mirrored sliding closet door wheel? Any chance you would have this part? The wheel diameter is 1 ½". There isn't really installation holes, because it looks like it's a variable side type of hole (see image 4). If you find something that is close, we can drill out the holes if ... (cont.)

I just purchased #23-090, the Bypassing Door Top Guide Bracket because the plastic broke on my current one. However, I have no idea how to remove the old one & replace the new one. Can anyone who has done this give me tips please?

Can someone help me locate replacement parts for these?

Hello,We are looking for a replacement track for our 1970s-era bifold doors (48" opening). I've attached a photo of the top and bottom ends of the doors hoping you could tell me if this item would be the correct item to order: https://www.swisco.com/track-48/pd/Wood-Folding-Closet-Door-Replacement-A ... (cont.)

Anyone know where I can get them ? Thanks

The original invoice issued by Home Depot in 2007 is attached for reference. It was a custom order. We couldn't find the supplier's name and the part number for the replacement. If found we would order a few to keep for future use. Thank you for the assistance. Yung

I'm looking for some replacements for this

We have a set of mirrored closet doors that are fine. But when we had the flooring replaced, the bottom track got ruined. The track is 94" wide. I understand we may need to buy two smaller tracks and put them together. I'm attaching a photos of the tracks, bottom rollers and top rollers - if you ... (cont.)

I need the (2 sets of 2)plastic clips that adhere to the top of the Monarch mirrored doors and a new track or 2 (depending on cost). Without these clips, the smaller door sits under the too holding bracket? but which will cause the door to fall. Are the brackets on the smaller door (with the nylon ... (cont.)

I see the bigger size is 71", I am replacing a 72-1/4" inches, do you carry something bigger?

Identifying name is MEDALIST, B, 3/4 front and 1 3/8 rear. 2 diagonal slots on right side and 2 screw holes on left side.

I ordered 21-071 and it works well. I need the fixed pin as well. What part code is that? Also I need the bottom track insert. Reminder to myself I need 21-149. Thank you in advance.

what is the weight that this track can carry?

Give me a Quote for 10 GUIDE PINS (5 1/4" x 1/4") and 2 Pivot Pins ( 5 1/4" x 1/4") ASAP. Thank you, Bobby

Thank you so much for your help with this. I wish I had more specific information or a part number or something else to go on. Maybe you can help. We bought this house a few months back and the mirrored doors in the bedroom had been removed to paint and replace the flooring. They are very nice d ... (cont.)