Viewing all customer Discussions for:

Closet

Is it possibly to lower these ramtrack 10122 lower ? If not is there a bigger size I can purchase ?

Good Afternoon. I didn't manage to find a part number on this sliding door wheel. Could you help me? Best regards.

I'm trying to locate some bifold door hardware. The length of a standard 3/8" top roller is too short for this door. Need to be about 1/2 inch longer. Not able to adjust height of base any higher.

I removed this corner block from the bottom of a mirror bifold door my question Does your 23-407 block replace mine? I would like to replace all four and would your 23-115 top pivot and 21-092 bottom pivot fit

I need to find a pivot pin for the bottom guide rail for a heavy mirrored bifold door. It needs to be like this one. The pin looks to be 5.5"-6" long and 1/4" thick. My remodelers somehow lost the other one. Thank you CFN

The pictures are of the concave roller and track from a vintage 1977 mirrored bypass closet door. The door is approximately 8',floor to ceiling. The roller actually slides into the bottom rail of the door frame. The flared sides of the roller engage with a small lip along the bottom edge of the fra ... (cont.)

I'm trying to get a part number for this "pivot capped track guide" that needs to be replaced from a 1990's vintage Stanley Monarch mirrored glass bifold door. I will need 4 of them but only one is seriously worn out. Or is there a replacement upgrade? Thank you for your help.

Probably purchased these doors from Home Depot and manufacturer is likely "Contractor Warehouse". I replaced the original track in one of my other rooms years ago with a heavier duty aluminum one that will not rust. But having trouble finding one to work with a nearly 8 foot opening. I hope you can ... (cont.)

I need mirrored closet door track, 1 bottom track 72" long in brushed nickel finish. 1 bottom track 96" long in brushed nickel finish

Closet doors guides

Hello I need the closet glass door bottom tracks the measurements are L 132 inches (11 feet) wide 3 1/2 in white color . n tell me how much is the price, Thank you!! Roxanna

Mirror closet door

We're looking for a 72" replacement track for mirrored bi-pass doors.

Hello, my old guy, the 23-027 has an adjusting screw (See photo most right above). Has the 23-093 also such a screw. How an I, when the door is hanging, getting it of the bottom a little. How can i adjust the 23-093 ?

I need 1 of these. 2 screws on bottom of door hold it in.

Looking for 4 of these replacement discs for my closet doors

As you can see in the pictures the hinge has broken and this model, 348, seems to be no longer available. Is there a replacement base plate that is interchangeable or a new model of hinge that will work in the place of the broken one? The base plate ahs the following numbers on the back 596.290.92. ... (cont.)

Have 2 mirror closet door 96x80 and 60x80 after the hurricane I saved the doors and what I believe is the top rails? But do not have bottom rails.can you help

I need to replace bottom track that was removed (and destroyed)during new tile installation. Recommendations for track and rollers to replace, please.

Dear Swisco, do you have the rollers for my mirror doors that were installed in my condo in 1978? Hope the photos with some of the identification numbers visible can help. Thanks, Gwen Sue