Viewing all customer Discussions for:

Drawer & Cabinet

Truth 30905 casement hardware

Looking for two white hinge extenders

I need to replace the part in the left in the photo which shows the two parts side by side. I ordered the part on the right thinking it was the right one, but it is too small?

Hello. I have an inherited nightstand and the drawers do not stay in when pulled out. The drawer guide was broken on one and I removed the remainder of the plastic. The other was already gone. There's a metal rail inside the cabinet body. I don't see evidence the drawer ever had a rail. Is the drawe ... (cont.)

Need to find a duplicate of this handle. The "twin" has gone missing in the course of a moveback for a Paul Davis Restoration job.

I need some white plastic shelf pins for a kitchen cabinet. The shelf is 3/4", the pin is 5mm in diameter, with the groves and it is a locking one, as you can see in the photos. On the back is printed, "P.X. IND. 34" and below "W. Hanover, MA." The holes, in the cabinet, cannot take a pin bigger tha ... (cont.)

I have Merillat cabinets installed in 1992. The roll-out shelf guides have what appears to be a 2 piece bracket connection on the rear wall of the cabinet. The piece that has broken is labeled left or right (see photo). If this part is available, I would require 4 pairs. If they are not available, w ... (cont.)

Do you have anything to replace the bracket below? I don't care if it is attached to a guide rail (sorry, I don't know the correct term). The rail is 19 7/8" or so long (20"?). Please let me know. Anna Bronnenkant'

Looking to replace this part in an old kitchen cabinet drawer.

I need to replace the whole track for my drawer, so I will need a full kit assembly for this piece. I have 2 broken drawers.

I need two replacement handles fora Vaughn bassett dresser as shown below.

pat # 4930739

The picture on the right is a broken drawer hanger, and the picture on the left is a drawer hanger that is in tact. I'm looking for a replacement drawer hanger that looks similar to the picture on the left.

I need help to identify this hinge

Help identify and see if you have a replacement. Thanks.

Would you have some of these or kow where to purchase them or would you have something that would work in place of ?

Vanity drawer has an overhead track. Need a new roller assembly. Would drawer track roller, 3/4" work for that?

I am looking to replace the lower inside hinge for a Merillat cabinet installed in 1999. The marking on the hinge says "blum"

The 2 bottom drawers, center drawers slides are warped and bent out of shape. I've replaced the brown end pieces 3 times (not pictured on metal slides removed) and realize now I need to replace the whole thing. I cannot find them at the local hardware store. The longer skinnier metal slide is just u ... (cont.)

I have a dresser that has metal drawer slides and wooden drawer glides. The metal slides have worn out the wooden guides. The back wall of the dresser is ~1\8" pressboard, so I cannot screw into that. Any product suggestions or general ideas are greatly welcomed.