Viewing all customer Discussions for:

Drawer & Cabinet

This is my first time needing to replace drawer slides- there were center slides, most of them split/poorly installed. Would 32-053 hold enough weight for dresser drawers, and how far out do they extend?

Do you have these clips (32-066)in clear?

IU INC or LU inc CB- 3325 1998 Canada

Here a picture of our broken brackets. Please help finding replacements. Thank you.

my drawer slide just came out and it keeps coming out. I have fixed it as best as I could, but I need something done permanently .... On the bent slide that attaches to the cabinet, it says UNIGRASS 6600 L6) It seems like it is a little less than 21 3/4". Do you have a replacement part for this? ... (cont.)

Many of thes hinges failed.A plastic piece shoots out of the hinge when they break.They have been installed for 6-7 years.The number stamped on the hinge is either,U3037.67ORU3087.67I 36 that need replacing.Thankyou,Fred

Pennsylvania House furniture bought in 2004. Drawer falls down and out because this piece is broken. 2 1/2" wide.

Please help i need to replace this Bracket

Kenlin rite-trak II. There is also the number 168 stamped on it.

Attached are photos of the socket bracket I need. The picture does not include the back of socket which I have tossed. Shelf bracket is side mounted. Any suggestions would be highly appreciated.

The drawer slider inserts into the socket and the socket can slide left to right a little inside the bracket. The slide that goes into the socket is 1 3/8" tall. I ordered part 32-003 and the slider is too big for the socket.

Please help me find a replacement clip

This bracket is about 20 years old. It is 5.5" long, mounting side is 2" high and opening minus the grove is 1". The slide is 21-5/8" long and is a side mount.Moe

Plastic piece at the end of sliding drawer is cracked. It is a small piece with a hole for a screw. It may be a decorative piece.

Looking for this pivot shoe replacement in 1 inch wide size.

348.220.50/00 face framed cabinet hinge made in W. Germany This number was on the back of the plastic side - 852.020.53.00

This is a Merillat discontinued rear side mount bracket. Unigrass brand.

I ordered Home Depot Schrock cabinets 15 years ago or so and need to replace the glides on this lower unit. HD was not able to help. I can get you depth measurements if you have these available to you - starting with some pictures. Schrock has "proprietary" holes pre-drilled for their glides and I ... (cont.)

The only word I can see on it is "right" and it's a right bracket. I wired it to give it more support, so please ignore that. The slide has a lip in the bottom that makes it not fit in the brackets I see in hardware stores. Appreciate the help!

Need to replace drawer parts