Viewing all customer Discussions for:

Drawer & Cabinet

652.220.50/00Looking for four hinges 170 degrees

Looking for this or something compatible. Thanks

Merlot cabinets 1986 vintage.Lower cabinet tray slid.Broken plastic right side tail piece (top is broken out) that appears to be glued to the cabinet and is 75% loose. (photo 0654).Cracked drawer slide receiver that fits into tail piece (photo 0656).The right side receiver pops out of the rear plast ... (cont.)

The part that holds the sliding drawer bracket to the cabimet has broken. All other parts in tact. The screw holes that mount to the mounting strip on cabinet wall are 1 1/2 inches apart and use Phillips screws. Can't see if it's just one or 2 screws holding it to the mounting bracket. But there ... (cont.)

I have been in search of a replacement part for my Thomasville Impressions armoire. It is the metal slider piece that supports the bottom dresser drawer of the armoire. It is approximately 16.5 inches long. Engraved on the inside of it are the words Kenlin Ent Inc. pat pend Here is a picture of my d ... (cont.)

Looking for a replacement for the white plastic piece that holds track on. This is from a chest of drawers.

This part is broken and I need to replace. Do you carry it? I believe it is a BlumThank youDino

Hello, looking for help restoring my son's damaged dresser drawer tracks... any help you can provide would be appreciated! Brown plastic. Kenlin inscribed in center of bracket, and number 0 The back of arrow-looking piece has number 2. Fromt has lower case c No markings on little circle piece ... (cont.)

Hello. Would you all be able to identify these drawer parts for a customer of mine?

The rear bracker for my undermount style drawer slide is broken and I need to replace.

I believe this is called a runner. It is for my kitchen drawers. Others I have tried are too small and the drawer falls off of the runner. Looking for a replacement.

The other day I received Kenlin parts that I ordered from you - thanks! I found out that I need another part. This is a pix of a 15.5 inch Kenlin draw guide - his is the part connected to the dresser - NOT the guide on the drawer. Do you have this part? Thanks!

My drawer pull just broke. It has the numbers 51998 KBC2003 on the back. Do you carry this? Thank you.

Would like to Id this hinge so I can replace due to a stripped metal piece behind the teeth where the screw attaches the Cabinet to the door. Thank you , Carole

What part can I use to replace this? I also need to replace the left side as well.

Merillat lazy Susan lower cabinet. Need relplacement for hinges. House built 1990. Hope you get pictures this time. Help

I am looking for 12 hinges

I have a bedroom suite that has u shaped drawer slides that work with wooden supports. The drawer slides mount on the bottom of the drawers. One of my slides broke and several others are rusted and appear to be close to failing. The dimensions are 14.5 inches long, 1.25 inches wide and 0.5 inches de ... (cont.)

This is in a coffee table where the drawer in the rear hangs from this connector on a wooden slide

Hi, I have several broken hinges that don't self-close anymore. My cabinets are Wellborn cabinets, installed in about 1994. The hinges are Amerock. I ordered a SKU# Amerock BP2811C1314, but the screw hole was not aligned.Appreciate your help.Mary PS - I'd like soft close, but I'll take what fits! ... (cont.)