Viewing all customer Discussions for:

Drawer & Cabinet

The rail measures 7/8" high. If you need further information, please contact us.

The part holds the back of the center track for a kichen cabinet drawer. It has a faint 18003 stamped on the bak

Plastic back brackets broke on both sides. Rails seem OK. Bracket is Ferrari, stamp GO25 on if. Presume rails are Ferrari too. Updated Ferrari bracket parts # looks to be G303-02 (l) and 03 (r). Have not found them online for sale as a set of 2 yet. Length of bracket is 4.25". I do not see an ... (cont.)

My drawer left slide(facing my drawer) got bend I need an replacement part with screws .. bend slide has Unigrass 6600 mark on side and 5 G on the other side.

Recently painted 22 cabinet doors. Would like to switch the current gold hinges with brushed nickel or silver. On one side of hinge that attaches to the door. It reads USIP Possibly the company's name Below that 4 US Patent numbers 3205532 3212124 3255484 3568241 Taiwan

This rear drawer slide socket is 5 inches high and 3 inches deep I will send a side view photo also

Here are the hinge photos

Cabinet hinge - home built around 1970. Patent # on one photo and the # 78 on 8 of the 34 hinges we took off in the thumb print between the holes for the screws. The carpenter that is working for us thought they were called a semi-concealed hinge, but I'm not sure. We are not able to find any to rep ... (cont.)

Threw away my Hardware need to replace or anything that's comparable

This is the part at the end of the slider that is supposed to snap into the mounted bracket. As you can see from the photos, one of the lips is broken and thus the slider keeps slipping out. Do you have replacement?

These hinges are for a pantry cabinet with three hinges. Any help you can give to find the correct replacement hinge will be appreciated. Thanks

Here is a pic of my bracket

This is the front mount for a drawer guide. It has 6603-002 on the inside. The drawer is in a kitchen storage cabinet, pantry cabinet. The last picture shows the slide mounted to this.

Hello, The inside mount for kitchen cabinet drawer broke. Attached is a picture of the broken one and one that is not and connected to slider bar thing. I appreciate any help you can give.

Looking for a replacement handle

The drawer is 21 5/8? The track is 22 3/8? The slide is 21 1/8? The metal track and slide are ok. The left and right plastic mounting sockets are broken

Hi Swisco - Need replacement sockets. 2 sets. They are used in my kitchen. The rail is about 1 inch wide and 1/4 in thick. Thank you, Caesar

The drawer guide attached to the drawer, the Plastic roller wheel broke off. Need to replace two.

Cabinets were manufactured by HAAS , bought in 1999. They mount by clicking in rounded part to a bracket that is fastened to cabinet back. Can you supply these or inform where to obtain. Will need enough to repair 7 drawers 2 to a drawer

Looking for a replacement part.