Viewing all customer Discussions for:

Drawer & Cabinet

I need a plastic fastener/clip to replace one the broke on a small blank kitchen sink wooden panel. It's about an inch in length and it's plastic. Photos attached and I don't know the name of the manufacturer.

Do have anything like this or that will work. The length Is 2 1/2"

My old chest has a 2" vertical brace with 32-003 rail supports attached to it with large staples. Over the years the 32-003's have failed at the box seam. I've replace them multiple times, but the wood brace is too narrow to attach using screws and the multiple outer holes. I think I need a rail s ... (cont.)

I need two of these drawer slides...they are on a Pennsylvania house dresser. Thank you

Mepla 348.258.00.35 cabinet hinge. The base plate that screws to the face frame broke. If you do not carry a completed hinge the base plate is all I need.

Hi there! We are trying to find the above referenced cabinet DRAWER pieces. Is this item something that you have in stock or can advise where we can buy some more. It is our understanding that this company is no longer in business. Thank you so much! Richard

Sending photo Let me know if you can help locate Thanks

Hi, I have an elgin metal kitchen cabinet, made around 1950. I need a replacement hinge for the door. Any ideas ? thank you

20inch long with plastic ball bearing wheel. Lever action stop. Cabinet side of drawer slide K-V No 1300 CR

The actual opening is about 3/8 by 1 inch.

The hardware on our kitchen drawers is Grant 338. They were installed in 1985. The front roller on the drawer guide has broken. Are the parts still available, or is there a replacement that you could recommend?

The description of the brackets state for a pair, is it per rail or per drawer ( both sides )?

Your drawer stop looks fine, but the installation guide is not clear. What would I be nailing/screwing it into? The drawer itself or the "box" the drawer slides in and out of?

Greetings. I just received my product code 32-119 Grass adapter bracket kits. They will work with my drawer slide(s) except one. I noticed that one slide is straight on the end that goes into the adapter bracket. Apparently this one was replaced at some point and was not installed as a pair. The oth ... (cont.)

Is this a screw onto the drawer rail? I need shelf pin that attaches to the drawer rail with a screw

Hi - please see the slides in the pics. The piece on the side of the drawer measures 21"5/8 long. What's your replacement part number? Also what is the part number for both the shorter and longer type rear slide mount as in the pics? Thanks Mike

Do you have a back drawer slide to replace the one that broke? It needs to be 1-15/32 in. wide and also 15/32 in. tall for the wood track? Hopefully the pics help. Ist one is the piece that's still working on the other drawer, 2nd one is an almost life size drawing with the measurements. Tha ... (cont.)

The drawer slide (image drawerslide4) keeps coming off the plastic rear drawer socket. I believe I used part #32-003 or 32-005. How can I keep the drawer slide. Is there anything deeper to secure it better? What else can I do? Would it be better to just get new hardware? Thank you for any ideas. The ... (cont.)

Scheirich cabinet drawer. Eternal measurements 22 and a quarter inches by 19 and a quarter inches by 3 and one half inches high. Not sure what to call other piece but one of the wheels is stuck.

I have some USIP 3/8" inset hinges installed on cabinets in a 47 year old house that we want to replace with a similar hinges in satin nickel. I've attached photos of the hinge. I found similar inset hinges at HD and Lowes but the distance (7/8") between the center of the hinge holes to the in ... (cont.)