Viewing all customer Discussions for:

Drawer & Cabinet

Looking for socket possibly by Merillat. Says Unigrass 6600 on the rail. Some say they use the Knape & Voqt part 1805-101WP as a replacement. Is this OK? What works best for these socket replacements? It looks similar to the Swisco 220X200 & 493X317....not sure what this means. Our hou ... (cont.)

Your 32-312 looks very close to what I have been looking for. The only difference I can see is that yours is thicker at the top. What are your thoughts. Thanks

Great to find your store and this discussion: discussions/Cabinet-Part-77-39537 -- I am going to order 4 of the 1" Drawer Slide Spacer Product Code: 32-339 *SEPARATE QUESTION* - I have a large/deep drawer under my oven for racks, pans and baking sheets that stand on-edge. There are several 1/4" thic ... (cont.)

Hello, I am looking for a replacement drawer socket that has broke. I have attached a few pictures of the socket and hopefully you will be able to help me with finding this part.

sockets slide onto a 1 inch metal 90 degree angle at end of back bracket ,the slides on the sides, slip into the sockets.

Looking for one of these replacement parts for a Childcraft dresser.

Can't find need to replace

need to know thickness of slide pad

This is a bracket for a corner cabinet

spring loaded safety stop to keep the draw from pulling out all the way

We are a medical facility and in both of our c-sections room we have built in SS cabinets with doors that work with sliders. The slider bracket works with a roller. The bracket is a Grant Rocket #1012 (1/4" offset and roller is 3/4"). Note the attached pictures. We are looking for 32 replacement ... (cont.)

Good morning, I need to order some drawer guides for my Bassett chest of drawers, however I can't figure out which part number! Can you help? Thanks!!!

I am searching for this broken Ronthor guide 2857233

Happy new year! i've found one part on your site that looks awfully close. Your part 32-031 has a slightly wider opening but is missing the 2 protrusions on the back which serve to provide a little more stability and hold the piece in place over time. Is this as close as I can get? Also, do you ... (cont.)

First hinge is for a cabinet door and is 2 5/8 inches. The cabinet doors are traditional doors (not full coverage). The second hinge is for a corner cabinet door and is 5.5 inches long.

1" length 7/16" wide at the top 3/16" thick 1/16" offset plastic button Thank you.

I found your website after googling the part number and am trying to identify this part. I found what looks like a brown wedge. See attached pic. It's markings are RONTHOR, NY. and R-50-108.

Do you have a replacement for the Mepla 510.358 hinge? Please see the attached pictures.

Need some replacements for older kitchen cabinets.

In product 32-101 the flange on hinge with three screw holes is 1-1/2" wide by what? That part on my hinge has the dimension of 1-1/2" wide by 1-7/16" long. Are the dimensions on 32-101 the same? What is the difference?