Viewing all customer Discussions for:

Drawer & Cabinet

I am in need of a round flat tack glide for a desk drawer. 3/4" diameter head 1/16" thick head The only flat round tack glide I see on your website is the 32-117 which is 3/16" thick. There is not much play in the drawer and I don't think your 3/16" thick would work. I am thinking ... (cont.)

Item # 32-014 would work for me except that the opening for the slide is not large enough. The opening for item # 32-014 is 7/8 " and I need one that is 1 1/8 ". Do you have any with that size opening ?

I am looking for a round flat tack glide, exactly like your product #32-117, however the tack glides I am replacing are closer to 1/16" thick, not the 3/16" of this product. Will this make a difference in the operation of the drawer, or do you have a product that is closer to 1/16"? ... (cont.)

Kitchen cabinet drawer assembly. The rollers are approximately one quarter inch wide and 7/8 inches in diameter. Could go to 1 inch diameter is anything like this available? Thank you

There are no markings on these rollers. They slide into the end of the frame channel and are secured in place by the two screws on either end of of the roller unit. The screws do not thread into a hole, they create pressure between the roller unit and the channel flange.

I'm looking for a replacement hanging slider socket for a Grass side mount unit. The drawer slide that is marked as 7523-16-560(?)/533 (could be 530 or 580, printing is incomplete). Can you please recommend a replacement?

Swisco, Do you by any chance sell this wheel. I need to order 10 of them.

This piece is part of the drawer slide in that stops the dresser that stops the drawer from pulling all the way out. The piece measures 2 inches long and is 1 1/16 inch across the widest part and 1 inch at the narrowest part.

Hi. I am trying to figure out if you have a replacement for this drawer guide. It says on the guide: Reiss Mfg. Corp. NYC R-26 PAT NO 2857233. I hope this picture and text identification helps you. Thanks!

Do you carry an 32-081 I-24? I need four of them but wasn't sure how to order them. Thank you, Mary

I am looking for this part for my Cochrane Brand Dining Table. It attaches the side walls to the leaf. They are all breaking. They are brown plastic. They attach to the leaf, then the sidewall snaps into the plastic to hold in place. Hope this explanation makes sense. I would like to order a bunch o ... (cont.)

Hi we are fixing our daughters dresser. the hardware that I have included pictures of his damaged. do you have replacement parts for this type of hardware. The hardware seems to match up with product code 32

bath room cabinet drawer slider bracket Bottom:1" top 1&3/8 grove:3/8 hight:9/16 thank you

We have a cabinet in the bathroom that has a center mount drawer slide with a center metal channel. The white plastic glide that screws onto the drawer is broken. The part number molded into it is S452. I would like to order one of these maybe two of them. Can you get back to me as to the cost and ... (cont.)

We purchased some furniture at a local retailer Gardner's Furniture) a few years ago and the drawer guides have broken, which allows the drawer to drop to the floor when it is opened and not supported. The furniture was manufactured by Hooker Furniture, and when we contacted them they indicated tha ... (cont.)

Picture 1 shows the right rear drawer track socket in use. Pictures 2-5 show the broken left socket that I need to replace. The metal drawer slide is 7/8" high. The only identifying mark I can find is the number 60.1890 on the end.

On my furniture, these plastic runners, have cracked, so I am going to replace all of them. My question is, would it help to put WD40 on these so that the plastic won't break? Are there metal runners?

We need 12 new heavy duty of these.

cabinet portion has right angle (slotted)which fits into bracket. No name on slide.