Viewing all customer Discussions for:

Drawer & Cabinet

I need to replace the hanging rear racket . The bracket is approximately 5 inches long, 1 inch wide on top tapering to 1/2 inch on bottom. I could not find any markings.

What is the hole/countersink size in the short glass retaining clip? Thanks, James

my BR furniture is 14 yrs old I got it from Lane I am told The style number on the piece is 201-14 and was part of the Windward group.(lane told me that) The doors are very heavy the hinge when flat on the desk is 4.75" long the overlap looks like it is about 5/8 - 3/4" and the pc that is recessed ... (cont.)

Hello! I would like to replace all of my back socket side-slide kitchen drawers hardware to metal if possible. The original/replacement plastic hardware I purchase at Ace Hardware always and I mean always break. I have a brand new back socket set (2) in an unopened package and one is already br ... (cont.)

Can you tell me if you stock these replacement parts.

How would these slides be mounted on the bottom? Will any screw work to keep it in place? Thanks

Need this guide for a table. As you can see in the picture the left plastic side snapped off.

I bought a used and freshly painted dresser that is in need of the pieces that keep the drawers from falling out. I think they are part of the Kenlin Rite Trak 1 system, the case runner (#32-076) & the drawer socket (32-081). Before I order, I'd like you to double check. Sorry I don't have measur ... (cont.)

lexington dresser 513-221, bent run and broken end piece as shown, would like to replace

white plastic piece, interior dimension approx. 1" 'square' - piece has rounded corners and slight indentations at midpoints. Piece is used to support central drawer slide that shaped like a flattened 'U'

how many screws come with each catch?

Vaughan Bassett part. Purchased parts about 5 years ago from Vaughan Bassett, part number on repair order is 960-002-401. Part is about 2" wide by 1.5" high.

Hello Swisco. Could you please try to match my cabinet hinge? If you do not have it in stock, can you get it for me? Thanks...Deborah

Part Needed: Plastic Drawer Slide Mfg. ID Raised Lettered -- "Hardware Designer Inc. #452 (1) Oval Shaped adjustable screw slot - top - centered. (2) Additional screw holes -- Each 3/8ths in from each side. "Mouth" = 1-3/4in. wide. Richard

Hi folks. These attach to the back of the drawers in our kitchen and bathrooms. Many of them have broken and we'd like to fix them - but this size seems to be hard to find. The track is 13/16" and the open (where the edges grip the track) is 7/16". Do you have such a thing? Thanks! David ... (cont.)

My broken drawer socket looks just like the 32-081 / -082 items. It has stamped on it "A-10" are these replacements an OK match? The application is a dresser drawer. I did not observe a case runner in the slide remaining inside the dresser, is a case runner required as well. thanks for your ... (cont.)

The guide track space is 1" wide. The base plate with screw holes is 1.875" horIzontal and 1.5" vertical. One side of the guide track has broken off, there is some damage to the metal track on the drawer, but I can fix that. The part says "Kenlin". Maybe that is manufacturer?

Need some of these rollers for desk drawer which are missing

There's no indication in the cabinets of maker or brand. These are probably the originals and the house was built in 1994.

We need replacement plastic holders for slides on older Lane dressers