Viewing all customer Discussions for:

Lavatory

I ordered a 10 557 set but I can't get the male fixture to fit into the female fixture no matter how hard I push the two pieces together. There seems to be no give or flexibility in the female fixture. What can I do?

Our 3-year-old shower door sweep needs to be replaced; this past Saturday I purchased a new sweep, but it is not straight - both ends hang down below a straight plane. The new sweep fits on the shower door, but needs to be held up whenever the door is closed - something that is not acceptable to us ... (cont.)

Do you have any models without pre-drilled holes ?

Hi, My shower has a pivoting, framed door. There is no seal on the bottom of the door itself--it's in the frame. It appears to be shaped like the Greek letter Omega and is mounted in a track. It appears that the only way to remount any NEW seal back in the track would be to remove the door and th ... (cont.)

This is the sweep , can u help me with it , thank you

I am looking to replace the rubber door sweep for our shower door. The drip rail is fine. It looks like there is a notch on one side to hold the sweep in so not sure if I need a rounded top? I don't think the "T" top would work. The rail is 25 1/2" long. What remains of the old sweep hangs about ... (cont.)

I need help finding this shower sweep. The tongue that slides in the grove of the shower plate is 1/4 wide see first image. The actual width of the sweep is 3/4 inch and it is 23 inches long.

As you can see from the attached photos, I am looking for a shower door bottom hook guide (S-Shaped). I do not know the shower door brand as I bought my home with the shower doors already installed. I have looked online but only found one type and it is not exactly what I need. I would appreciate an ... (cont.)

Please help!!! Can't seem to find these anywhere. Height: 2 - 1/16 Width: 1 - 4/16 Depth inside : 5/16 Total depth: 7/16

can you tell me the size of the towel bar opening on this handle and do you sell a corresponding size towel bar? and if so, what lengths towel bars do you sell?

We picked up this shower door at a sale but no guides came with it. I am not certain which one it needs. There are two small holes on the bottom of each door. Thanks

Hi, I have checked the length from centre of both the holes and it is exactly 2 inches. Can you suggest if we can get the same piece for 2 inch length. If not - what could be my option - can you please suggest. There are holes in the glass door with 2 inch spacing on both sides. Regards, Man ... (cont.)

Hello, Can I use a frameless shower door sweep like 10-328 or 10-331 depending on glass/door frame size to replace a shower door sweep like one that like 10-324, 10-325 or 10-326? The frameless sweeps look/seem so much better and appear easier to install. I appreciate your help and look ... (cont.)

These clips appear only on the inside door of my shower. I think I have found them on your website, but wanted it she sure if you could confirm the part # please.

Hi..my three shower doors need to have rubber seals replaced. I am not sure the ones I see match mine....it looks slightly different. Attaching a picture...if it is not clear enough, I can try again. Thank you.

It looks like the original sweep (24 inches) is adhered to the metal rail. The metal rail itself does not appear to be removable so I think I need a new flat backed sweep to glue on after I clean the metal and remove the old. Can you tell me what parts I need to replace this? Thank you, Amber ... (cont.)

No markings on hinge. Appears to be chrome plated die cast.There is a latch in the same unit which is marked "Mills", but who knows if both parts are from the same manufacturer.

My sweep measures .155 wide on top of the T, and is less than 1inch in height from top of T to bottom of sweep,and 30 inches long. It's also clear in color. What do you have. Thanks.

I purchased a round shower kit from Home Depot back in 2010 and now all the parts are breaking off so I'm looking for pieces to fix it (rather than buying/installing a whole new one). There's a top roller assembly that totally looks like the it will work with the 10-058 that you've been recommending ... (cont.)

How far from each end of the sweep are the screw holes?