Viewing all customer Discussions for:

Other

Trying to find a new bottom rail for shower door. Screw boss that's holds bottom rail to side vertical rail has corroded and screw will not hold anymore causing bottom rail to drop and not close properly.

I have a home built in 1993 with two K & K sliding doors. I need to replace the hardware pictured for one of the doors. I hope you can tell me what I need or where to locate an identifying part number. Thank youTim

Trying to find a matching replacement for this door handle.

On glass: PRL 1/4 TEMPERED SAFETY GLASS ANSI 97.1-2004 16CFR1201 CAT.11 We are in need of replacing the lock

The peg is broken off the pictured part. The part is taped together to show measurements. The same part on the other side of the window is also broken. The short leg of the "M" shape hooks over the flange below (in photo, to the left of) the screw hole when the part is screwed into the frame. Do ... (cont.)

I need right and left sash caps. 1 7/16" long. Top is 3/4" x 1/2". Bottom is 1/2" wide. Hole is 1/4" from top.

Looking for replacement for these 2 parts. Both vinyl windows

Looking for this pull. Purchased in '80s. Need replacement. Thank you!

11600-17 E39 9#27 10-86

Hi I'm looking for similar parts for windows that were installed back in 1980s. I don't know the manufacturer of the window; it's a single hung aluminum frame type and the bottom panel moves up / down & even swings open like a door. The part I'm looking for is a window balancer. I can attach a few ... (cont.)

I don't know anything about this window lock. There are no names or numbers on the window. The window opens and closes but can't lock.

Greetings, Hope you are all well during these bizarre times. Any-chance you guys have a replacement or can identify this hinge. Thanks for the effort, stay safe. B

Pella screen door lock keeper

Hello, I have a Ventarama domed skylight which has a splined hook attached to the skylight side rather than the pole side to open and close the skylight. It looks very similar to your 39-214 metal hook. The best/closest measurement I can get for the spline is 10/32" Do you have a listing for a "V ... (cont.)

I am looking for the right pivot shoe. I believe it is 15-173. Also, looking for sash stop. The sash stop that is shown in picture is from a new window and doesn't fit the old windows. I have found the right spiral balances and tilt latches on your sight.

I'm looking for 4 replacement wheels for this closet door. The part with the wheel in the picture had to be unscrewed using the height adjuster. There's no other way to remove the bracket that it fits into.

The metal hook recepticle which is screwed into the door frame is being compromised from continued slamming against it. We have to constantly pull it out with a flat head screwdriver to ensure the door lock will still slide under and latch to it with ease. We probably should replace the entire handl ... (cont.)

Cannot get door to lock took unit apart and some metal came out. Want to replace it

Do you have such handle set in stock?