Viewing all customer Discussions for:

Other

Can you help me identify the right type of snap in glazing for my windows? Also do you have any parts to fix the bottom of the window? (the part that you use to lift the window is broken and so is the lower part of the frame)

I am looking to replace broken balance but not sure what one I need. Here are some pictures not sure if its a 6 or a 9. Window is 31x45 thanks Paul

Hi, We're trying to find hinges comparable to the discontinued Mepla Match. We appreciate any help you can offer. Thank you!

Looking for weatherstripping for our 25-year old Republic bow window.

I have been unable to find yes take killer vinyl beading pattern. The color is beige and the dimensions are shown in the third figure. I don't know the manufacturer of the windows, but I hope that you have some beading that will fit. Thanks

window coil is bad

This sash lock looks very similar to the ones that you have available. It is a just slightly different than what I see on your website. Let me know if this is still available. Thanks, Paul

Wasco 6' patio sliding door.

Please recommend replacement parts. Thank you.

I need two rollers. Each is 5/8" wide and 1-7/16" high. Each has two metal 1-1/4" diameter wheels. The screw that raises/lowers the roller is 2-3/8" long and as you can see in my attached pictures, the screw fits into a cylinder tube which is 1-5/16" long.

I am in need of these tilt lock parts. I have Simonton windows in my home that were installed in late 2000. Can you recommend the correct part? Markings on the part include "Pat # 5.139.291" and a "08" on the snap which I believe is a cavity ID.

Are you able to recommend a replacement for this pivot bar?

Looking for replacement of broken sliding glass door lock. Thank you,Katherine

You use to carry part 26-264 - top tilt latch, right hand. I am looking for that part along with the corresponding left hand sash.

photos of the sliding door roller I am looking to replace.

Hi we are looking for the part shown with the tab on top. It slides to unlock one side of the window

I am currently looking to replace three sets of Series 795 channel balances with 15-198 hooks and 15-194 shoes. Below are the balances I'm looking to order: S795-26 option 26C S795-28 option 28C S795-32 option 32C Please let me know if you'll need any other information from me.

Please provide P&A for the attached handle. Thank you very much.Teddy

The mechanism starts ratcheting when the window reaches almost full closed and starts to provide some resistance, so can't close the window all the way with the hand crank. Want to replace the whole mechanism, but can't find a part number. Unable to get the lid off the mechanism without potentiall ... (cont.)

Dear Representative, I need to replace 8 of these for for windows. the windows are all the same but one of the parts has a different stamp. They are the original ones that were installed by the builder. I think they may have used one different one by accident. The windows are all the same size. Do ... (cont.)