Viewing all customer Discussions for:

Other

What series would I purchase to replace these block and tackle? The sash were stuck and my customer broke the vinyl around the pivot pin trying to lift them. I'll deal with that later.

Do you have a replacement mortise latch for this Cole Sewell storm door? Registration Number 06070094538 0017 (pictures included). Thank you!

I have a window balance rod that has a cord, a spring, plastic pieces at each en of rod. the rod is a channel type of metal and on the spring end of it has a plastic piece with a sharp angle end, not the pulley side where the cord was attached has a plastic piece with a rounded end it measures 29 1/ ... (cont.)

Broke,unable to open window - don't understand how to replace when broke.

Balance is marked 6R. Lower sash of an Anlin double hung window, 29"W x 35"H. The sash weighs 13 lbs. Parts look OK except for broken coil, so if possible I'd like to order just the coils (6R and 6L). Thanks!

4 bottom guides straight (LIC PAT 5,069,001) 1 Sash top cover 1 bottom 90° guide 6 Sash locks internal with springs

Pull Handel to compliment brass or stone easy grip 5 1/2 screw centers 2 sliding doors

43x53 double hung

what are the part numbers needed to replace coil spring and complete housing both portions. Is it the same part number for left and right side of window?. On my windows the coil broke on both sides as well as housing.

LOOKING for a window single arm crank, made by TRUTH model DEF5153, cheers

I need to replace Andersen Narroline Sash Balancers for two of my windows. In one of the windows, both left and right sash balancers have marking '519' whereas the other window has marking '927'. I would like to know can I buy two 519 and two 927 for these two separated windows? Do sash balancers ... (cont.)

We need to find out which parts we need to repair this window, please let me know if there is more information you need.

Can you tell me which part number is for this crank out window I'm looking for a left side and right side operator

The pin is 1 3/4" in length, and is made of plastic. The window was installed circa 6 years ago. On the window it says: CIG6 15 AWA 42804-4A11 NFRC 272 Integrity From Marvin.

I have a Silverline window parts fell out where the window lock part( the window is open towards up and down) so I'm not able to open the window anymore, I tried to find this part replacement from Home Depot and Lowes but they don't carry that, enclosed is the picture of the parts, is there any wa ... (cont.)

Hi not sure what model I need for this.Can you identify should be a right-hand crank i believe.#30710 number on the body and #20755 is on the clip armThank-YouBill

Here are photos I was unable to attach to my previous message.Louise

Looking for the grey metal part on the tie bar that has sheared off but not sure what it is called - please advise.

looking for window clip @ 1/2 w x 7/8 L. the clip is for a trailer park window-

Is SWISCO product 39-089 good for replacing the old crank (see photo) system