Viewing all customer Discussions for:

Other

couldn't find any manufacturers info but at bottom of spring on plastic guide found patent "4*610*108" . This is the plastic guide where the sash attaches to with pins. Can you help me?

Latch for sliding window

They are Entry Gard truth printed on the operator with the number 20810.They are 4 1/2" by 1 1/4". I want the cranks comparable to this that fold in the mechanism.My name is Diane

Looking to find the correct match for the window track the attached photos.

Need help finding the covers/springs for simonton windows. The exposed cover for the springs has broken on several windows, sun exposure. The upstairs ones have the mounting above the bottom window. I checked the downstairs ones, they are inside the track hidden by bottom window. Are the exposed one ... (cont.)

22c BSI 22 inches long. please see attachments. no name on vinyl window.

part number and where to buy it from? thank you

I need replacement crank assembly for my marvin casement window. The spread of the arms when closed is approx 23". The crank is in the center of the window at the bottom. The crank doesn't close the window, instead the handle threads itself out of the housing

Hello, I am looking for (175) replacement wheels like the attached. These are commercial windows in a hotel.

Good morning Swisco folks. Please note that I am looking for replace ment sash balancers for MW windows. I have enclosed a photo as requested. The length of the balancer is 28.5 inches. I need (20) total if there is an exact match or something similar that I can use. I look forward to hearing from y ... (cont.)

Hi! The inside handle of my screen door broke off. I looked everywhere on the door and couldn't find a manufacturer. I'd much rather replace a handle than the whole door, so I hope there might be a replacement. I appreciate your help!

I have a double latch lock that is 10" in length and the following markings: Nov 14 PAT# 6264252 PAT# 5820170 I am looking for a direct replacement. Any assistance is greatly appreciated. Thanks!

This is Millard sliding door weatherstripping from 2004. It goes where the two doors meet. The width is about 1" (27mm), the arm height is 0.45 inches (11.4 mm) and the bubble is about 0.4 inches (10mm). The only label I could find on the frame is enclosed as a photo.

I need a replacement handle and latch. The plastic lift and closer is broken. Where can I buy this part?

the balance is broken and need replacement.

Picture of house,word truth inside

Metal channel is 33in. Stamp is 3240. 20 years old.

Length 31 3/4 Inches 31 5 B.S.I.pv Need 8 units

The plastic locking guide helps the lock pull the window into position to fully engage lock

Hello, I have several broken channels for my windows. Can you help identify what kind is it? Looks like Series 351 by comparing the images but I am not sure. Thanks !