Viewing all customer Discussions for:

Other

To whom it may concern. I own and manage 24 rental properties in Baltimore. Some of the windows need replacement springs and I am wondering if, based on the attached photos, you could give me your best guess for what parts I need to order. The windows are 34x60 (which hopefully will help guess the c ... (cont.)

Numbers stamped on the balance is 3450 bsi

I'm looking for vinyl window tilt latches for Patriot Windows. Top plate length is 2 5/8" and width is 11/16" and thickness is 3/8". The bottom plate has the letter F and the numbers 08 on it. The end of the spring-loaded clip is curved, not straight. Thanks for your help.

What I am looking for is 17 x 5/8 & 14 x 5/8 my tip looks orange but could by red. Also need the shoe/cam for both sashes, see above picture. Measures 9/16 or 5/8 thick 1 1/4 wide and 2 9/16 long. The sash pin area is open so that pin drops down into it. Would it be possible to use a different style ... (cont.)

I'm looking for replacement window latches, "Care-Free" is cast into the existing latch. The window is a horizontal sliding window, with the keeper mounted 90 degrees to the latch, so the keeper needs to have the "cut-away" for the latch to rotate and engage. The screws are 2 1/4 inches apart. I've ... (cont.)

Do you have a crank handle that fits this MI 9770 Series window. It is a dual arm. All works well, I just need a crank handle. It shows that it originally came with a folding handle. Please let me know if you can help. Thank you.

I am looking for a replacement for my Delta Industrial SL-14-108CBC sliding glass door lock

Hi, I am looking for replacements for the enclosed window operators. I need about 12 of them. I don't have any information on the parts. Can you identify from photos?Kind Regards,Michael

Hi guys. I need 10 of these. Couldn't find them on your website. I know you got them somewhere!...thanks, jay

tilt windoe latch 3 1/2 lenght 1 3/8 wide 2 1/2 center hole to center hole

This number is printed on a window channel balance. 26-3 CF5 CMC 54. I believe the part is a 27" S385-27 but don't know what these numbers mean. Mark

I have the Forever Doors by emco L-639342 It is a tan colored storm door 1" wide The handle was busted and I'm looking for it's replacement Thanks

Can you assist me by identifying this part and sending me a set? The length is 30 inches, not including the end caps.

Window crank comes out. But doesn't close the window.

Window will let out but want retract. Handle just turns out of the crank.

Hi Our picture windows will not close. Recently purchased this home. We need 4 of these plastic pieces for the slide bar to catch to close the window properly. Do you have these? Thanks Kevan

Looking for these parts.

The holes are 1-1/2" apart. Can you offer any suggestions?

2369 L & 2369 R I assume that the are Harvey Windows I live in NH. The pivot bar set that arrived today form Swisco was 26-416 oops it to big.

Door handle replacement