Viewing all customer Discussions for:

Other

Would like to get 2 legs for this nightstand. Please send me the cost to replace the legs.Carole

Hello! Can you help with this? Body of the part is 9/16 or 10/16 inch wide and about 3/16 inch thick. Upward stem is 5/16 by 1/8 inch. The window is 20 years old, and I believe it was manufactured by a firm called Benning. Thanks! Peter

Hi, The crank on my window shutter is broken. In the pictures attached, the part that I use to the close the window (crank) is separated from the body and won't latch on. The crank was able to open the window further but not close it. I had to put bricks on my blinds to keep them closed ... (cont.)

I have a truth encore encasement window which needs a regular. It has "Truth" and 31858 on the operator. I've not removed the operator. Can you tell if it's the 39-438B or the other one with smaller clip on the end of the long arm. Attached are a couple pics. Thanks in advance. Randy. ... (cont.)

I was not able to find any markings or indication on the window. The house was built in 1990.

I'm looking for a replacement part for my Brammer kitchen cabinet It hangs the whole turntable assembly

I removed and subsequently lost the plate that holds the handle lock in place. I would like to purchase a replacement plate only.

This goes on a metal frame to hold the window pane in place.

Hi, I am trying to find replacement parts for my mother's Weathershield casement window. The left side of the window does not open, it feels like the mechanism is slipping when you turn the crank. The only identifying numbers I can see are 31850 and 6D406 on the parts (picture included). The manufac ... (cont.)

Do you offer something similar to this operator?

Channel length 32" I need help identifying the proper replacement. Let me know if you need better photos or other measurements. Thanks!

It's visible on your picture of the Storm Door Mortise Latch Product Code: 40-198.Is it possible to buy just that?Thank you much!!Jay

Hi, I'm looking for a replacement part like the picture. This is "supervision" brand from the late 80s. Thanks for any help you can provide, Dominkka

Trying to locate a replacement for one of these cleats which anchor the stationary panel on a sliding glass door. No identification on the door at all. These are plastic, but metal would be even better.

I need a replacement operator for a Semco casement window. The brand name "Truth" appears twice on the mechanism, along with a capital "L" and the number 31538. I hope you can identify the needed replacement part from this information.

I carelessly broke two of these tilt out window latches while pushing the window back into the track and need to replace them.I have several more of the same style windows in the house, so I'll need 6 total replacement latches to keep some as spares, to avoid having to reorder, along with removal an ... (cont.)

the door sweep is 1 3/4" across and the "legs" are 1 1/8" apart by 36" long. The side gasket is 3/8 X 3/8 with a diameter of 5/8"

Hello, I am trying to match the weatherstripping for two of my exterior doorways. When I attempted to match this at Home Depot, the only similar option was far too small. Could you help me identify this? I am happy to provide dimensions but I would need some information on which specific dimens ... (cont.)

I have a possible client for installing new wood grilles ver glass on a Showcase casement window. I was referred to you by the manufacturer. Please help. Thanks

Do you carry this aluminum window Glazing?