Viewing all customer Discussions for:

Other

I need to replace my casement operator on my Marvin window. I installed the window almost 30 years ago and I believe the operator is stripped. It works one way but just unscrews the other. Let me know if part #39-031 will work. Thanks, Sean

I have been looking for a while for these, but do not want to make a mistake and buy the wrong units, I know mine have wings on the attachments, and they measure 27" from one end of the metal channel to the other end.

Just has a pat# 6.264.252

Hi, I would like to order 2 of this window balance but not sure which one is the best fit as the shoe has wheels. It will be great if you can advise me!

I apologize as I am concerned that removing the gasket will destroy it in a functioning window. I hope the photo's and description will help. The windows are aluminum, house built in the early 1990's, and the only identifying marks I find are on the locking fixtures on the top of the sash. They are ... (cont.)

Do you have a replacement for this type of channel balance? I'm not sure of the length at this time. Thanks. Rich

I have a bi-fold closet door (wooden) and the door has become unhooked and I am struggling to get it back in. I've attached a picture of the pin and the little door guide (not sure the name of this piece). It seems like this door is older, so I can't easily find these parts in hardware stores. I ... (cont.)

See attached pics of the T Lock i need.

Hello. I have a channel balance that is similar to the one posted here: https://www.swisco.com/discussions/28B-77-131964 29" metal to metal, 9/16" wide, 1/2" deep However mine is marked "28B USB" instead of just "28B." Per the comments, this channel balance is probably my best bet: https://www.s ... (cont.)

I am looking for a replace part for a Larson Storm Door, both the inside and outside handle. Serial # to door is 37081032.212 (08 03 05). Both sides of the handle needs to replace.

Good Morning, I would like to order (6) of the S795-34 channel balances stamped with a 34C with a 15-198 top hook attached. Please let me know if you need any other information.

Need several balances. No identification noted on existing hardware.

Hello, Please see the double roller part that is very hard to find. If you need the exact measurments please let me know, but I figured if you don't have anything close to this then why bother. Let me know. Thanks so much! Jared

I need one of these locks, pretty much regardless of cost.

Window aperator

Hello, I have been trying to find some shoes and pins for some windows. If anyone could help, I would be very appreciated.

I'm not sure if this channel is 26 or 27 inches? The metal channel measures 27 inches. It's stamped 26-5. I do not see any letter to determine the weight of the window ether! Thank you Frank

The only markings I can see is 2900.

47 year old furniture held up well but issues with drawer slides - shot. Wood track (not an issue is 1 1/16" wide by 3/4" high). Metal slides are 13 1/2" long with a 3/16" front clip (under handles) plus a 3/4" bendable back clip for mounting. Slide is also 1 3/16" overall width and 1/2" high. N ... (cont.)

Window pivot bar