Viewing all customer Discussions for:

Other

Need parts that receive window and block and tackle. Both

Do you have the style?

Hello.My sliding glass door to my patio needs a new roller. The house was built about 1976. I do not know if the roller was ever replaced. I have lived here almost 32 years and have never replaced it to my knowledge. It appears to be a very thin assembly...1 cm or 3/8 inch wide. I do not know h ... (cont.)

Found what appears to be an exact match on another website. Measurements and appearance are an exact match.Not sure I can tell you anything more than the 4 pictures will tell you.Thanks in advance for you help with this.Steve

Hi, My operator is stripped I believe it to be 39-318 I also need a compatible crank handle so suggestion on that would be great Also the bottom track is broken, it is listed as a Del Mar hardware part - picture is attached, I would appreciate a matching part to that. Also need a new window loc ... (cont.)

Lock lever is broken on Anderson door lock. Internal mortise lock is corroded and needs replacement as well . Please ID.

Hello, can you help identify this coil spring? The one in the pictures is from the left side of the window. The right side is completely missing the spring. There are no labels/markings.

Need replacement locking part for vinyl window. Noted "WW" marking on existing hardware.

This operator for a Truth casement window has the number 45035-RH. The casing is a one piece casting, with a single arm. I have been unable to find a replacement Ben

I believe this is the sash latch for a Shwinco Window.

I need replacement wheel assembly(s): Bottom for sure. Top?Door dimensions: 76.25" tall x 35.625" wideIts hard to slide it open.My Contractor suggested I contact you to get the new wheels. He will install them for me.

Need a replacement part number 31876

I am looking for the saddle piece

code: JW-12 SD-R20-4B77x I can't read the rest of the sticker First the lock snapped off, then 3 months later the handle become unscrewed Not sure what size is needed for replacement

Complete replacement

How much and how do I get it?Thank youKelly

I need to replace one broken window sash part. The set I have appears to be two different manufacturers. The broken one says Caldwell. Thank you.

hello. has these numbers on the back us patent 4241541 Can pat 350432 Pat. 1982

Channel length 24.5 inches Stamp says 25 5 B.S.I. PB CertainTeed window 2006 Need two balances, plus one stop in the frame and one part at the top of the Channel in the window. See photos.

On a sliding glass door