Viewing all customer Discussions for:

Other

I need to find a compatible pivot bar for my single-hung, tilt vinyl window. The broken one measures 3-1/4" total length, the broken end is 3/8" long, and the 2 screw holes are at 1-5/8" and 3".

Hi,I have 10 top sashes that need replacing and I'm thinking I may be able to use the 18-015 for PGT windows 1988 models.Please advise if this is the correct part.thanks so much,Paulette

Need pricing on 40 - Ultra-Lift Balance 21 " * 24lbs

Need to replace Blum cabinet hinge. It says 110 degree, 1 1/4", 213, also has 34.355-01.01 stamped on it.

I have Series 0201 Double hung PL# 004-011 windows, one of which has defective coil balancers. Can you direct me to the correct replacement parts. I believe it is an Alside window.

The arm is 13.5 inches from the center of the gears and to the center of the detach clip. The body is 5 inches wide and 2 3/4 inches high There's no numbers or descriptions on the device

Pella door gasket door #0501 PLCSCVF1Z1-072A081AWHT-615S-NFRC

There are no markings on the current ball bearing slide. it is from a chest of drawers, center mount under the drawer. the inner slide is 14 5/8" long x 1 3/8" wide, the outer slide is 16" long x 1 3/4"wide, the inner slide has a screw mounting tab on each end.

Left channel for nuprime windows .channel is 24.5 inches long ( measurement from top to bottom all metal) .I need complete channel. Can you help me.

Hi, I am looking for these I need about 52 of them

I am looking to replace a casement window crank for a window in my cabin. It was torn out by a bear. The window was made by Bergerson Windows in Oregon but they do not seem to be in business The name on the hardware is Anderberg and they seem to be out of business as well. I hope you can help me ... (cont.)

House was built in 1993. Has Viking windows. Part number 2690EE28 Can send more pictures if needed. Need replacement parts for two windows exactly the same size. Length of bar is 28 inches Thank you

Hello, I was wondering if you could help me with determining what replacement parts I would need for my window. Please see attached pictures. My understanding is that I need an 11" block and tackle part, but I wasn't sure if I needed an exact match when it came to the stamp code (1090). Could I g ... (cont.)

Simonton H-R35 single hung windows; all balances, shoes and latches require replacement in our home. (most still okay but will replace all anyway due to age) First photos are of the latches - third is intact balance and fourth is two balances/shoes on a paper plate after I removed them. Want to conf ... (cont.)

Hi - the crank (left handed screw) just unscrews when I turn the crank. It appears that a knurled cylinder part that is part of the initial screw mechanism has become disengaged; It seems that cylinder needs to be forced back in (to keep the screw mechanism in) but won't stay in possibly because whe ... (cont.)

Hello, I am looking for the bottom part for our closet doors. The roller part. We need a quantity of 10. Do you have those available? See attached picture. Dino

Can I please get a price and availability for the attached rollers.

We need to replace this latch as it's recently stopped working. Having difficulties finding someone to fix this, as we are renovating our family home for sale. I've seen no numbers to speak of but took this picture. I hope this helps. Thank you so much.Pamela

Hi, we have loewen windows, and one of the double-hungs has a small metal piece that is broken. It's about an inch long, bronze finished, and it seems that it helps hold up the upper sash. The piece goes in the outer track, on the right side, when viewed from the inside of the house. The windows ... (cont.)

Need replacement part, window operator sliding kit for 2 windows