Viewing all customer Discussions for:

Other

Unfortunately there are no markings on this weather stripping. It's on the original windows of a Pulte home built in 2005.

About 23 years old. No names or numbers.

I included tag off window and no markings om pin

These doors were designed and manufactured in the netherlands? Have been told theynare no longer making parts.

Needing to replace the crank and scissor mechanisms on both windows-I spoke to Brian and he pointed me to your website. I am looking to replace these parts-Possibly the "encore" items?? My husband is very handy and will be able to make the repairs. Can you please help me?Thanks

Hello, I've attached what I believe are broken balances. The window will not stay up when you open it. The photos are at the bottom of the window on each side. The best identifying number I could find was A.X7164 but that was on the bottom of one of the screens. Any assistance or direction will be g ... (cont.)

Need the metal plate that is drilled to the side of the frame to hock the lock too. please call me if you need pictures. Thank youRobert

I am pretty sure that I need your 385 series. But wanted to verify. The shoe is 1 3/32, so it's not the 380 series.

Need a ROTO window crank. 1 right. 1 left. 0P051505 and 0P051506 and 2 crank handles and also the 2nd arm that attaches to the bottom of the window casement on the 0P051506. It rousted through and separated from the jam. Jim

We need this crank casing that has two screws for Anderson casement window the number we can see says 9 83-1

Weather stripping for side windows of a Milgard Bay Window that was purchased in 1995. Milgard sent out round bead type, but original is bigger and is more inline like a windshield wiper. Help! Thank you

Do you have this piece?

Need left and right side. Saw an 8 on the part

These windows have been put in in early 90's. I need 8 of the 2520 and 4 2530.Best Regards,Hanus

Awning window latch for Viking window. Bronze. Please see photos.

Need 2 0f these.

trying to purchase two sets of replacement channels Numbers printer are 20 4 and 20 3 I am replacing

The screw hole at 4 inch on center. Latch hole is 1.5 inches long. The house was built in 1970 in Massachusetts

I have a certainteed casement window (installed 1999) that hinges on the left (when viewing from inside). The crank mechanism has the gear stripped and the bottom hinge is broke. I am looking for replacement parts to repair the window. Would need price, lead time, and a picture of the parts to co ... (cont.)

I have old sliding glass doors from years ago. I think from late 70s. I have enclosed images of top and bottom and tracks. I would rather not remove doors and then have to go through the process twice. Hope you can identify my exact rollers I will need.I would also like to replace the handle interio ... (cont.)