Viewing all customer Discussions for:

Other

Hi I have a request. I would like to know if you guys have theses parts.

9obs dual coil. This has two screws that goes in.The pictures is missing the half shoe.

Hi, looking for two of these. Length is 22", weight of sash is 37lbs. The white end appears to have had side tabs that have broken off. Thanks for your help- Jano

Hi, I need to order replacement window channel balance. There is a part number on the part that says "20 3 Caldwell KM". I have attached the photos of the part. Please help identify what to order. Thank you!

This balance rod/guide or whatever it is called is for an Alcan window. I believe it is 24" and the numbers on it are 2310. Also need the top sashes.

Hi: I need to replace the hinge on a window that I can't open until ready to repair because it will not close again due to broken hinge. Attached is a picture of the hinge on another window except the broken hinge opens the other way (opens on left side of window and swings to the right). The rai ... (cont.)

Hi, I'm looking for three replacement opening mechanisms for three different Gorell Windows. The first two are the file: 20210708_161621. I need a left hand, and right hand one of these mechanisms. The third is the file 20210708_161818. I need just one of these, with the handle on the Right side ... (cont.)

Hi. Can you tell me when this door was made? See photo below. Thanks

I am looking for slot latches for vinyl windows mfg. around 2000. They don't require any screws to attach to window. They slide into slots.

Thank you

My patio door is an old one. I'm guessing from the 1960s. The screw spacing is 3 inches OC and the latch is surface mounted not in the door itself. I couldn't find any brand or numbers.

Hi, I have attached 3 pics of a lock shoe that I need. Its an 1 ¼" wide by 2" long with a thickness of 3/8" I can only locate ones that are a half an inch thick. Any help would be greatly appreciated. Thanks Jeffrey

I'm looking for similar parts to replace the broken ones. It's a guide for the slide bar that secures the movable window to the frame.

Size of steel roller is 1.5". Size of roller is 2.5" long, 1.5" tall and 3/4" wide. There is a screw on top of the rollers that hold it in place to the bottom of the frame of the sliding glass door.

Looking to get this in other finishes if possible. I sent seperate email as well. thanks in advance.

The window balance is 27 inches.

Having a hard time trying to find this guide stop.

Need this replacement part is broken and window wants to fall. On part it just says Truth 32.

for double hinge crank is stripped

There are 3 window operators needed. Two of them from the same pair of side by side windows, one is a left hand and the other a right. But they seem to be a pair. The other is a single operator needed. Of the five photos it is the first or last depending on how they come through, but there is onl ... (cont.)