Viewing all customer Discussions for:

Other

Looking to replace my window balances. Making noise. I need 2 complete units. Tops and bottoms also. Help would be appreciated. Thanks

Need an exterior key lock for this slider.

Channel is 33 inches long (not including plastic ends) Markings are: 3230 in large horizontal numbers Then B (or 8) SI in faint vertical lettering at the end of 3230 Then DL in small horizontal lettering after BSI

The window cranks (Crestline) in several of our windows do not work any longer, since the gears are worn out. We need replacement parts. Please advice on how we can order these. Thanks.

Does anyone know which SWISCO slider handles I purchase to replace the two OLD ones on my Blomberg doors. The wood handle ( inside) is approx. 9 " tall and the plate it connects to is approx 7 1/2 " tall as is the outside handle (plastic). Thank you, Alan

What "s" number is this?

This is an old house and all of the windows are like this. Most of the part is broken and couldn't find a good part at all. I need to know the right part and will order bulk to fix all of our windows.

Plygem Double Hung Lock and latch

i have a broken door latch assembly for PSH 0397. the dead bolt works but the dang door handle bolt broke and locked the door in place. i had to disassembly another same as the broken one to figure out how to pull the handle bolt back and open the door. i have no idea the brand or age. PSH doesn't g ... (cont.)

These are vinyl glazing beads from a metal framed insulated glass unit . Unsure of brand or year mark . Can you help me out

I believe I need a part replacement for a Mercer window opener. The part in the photo is the broken part that I believe needs replacement. The bottom of the bar came "undone", broken (or popped out?)I think the part number is Mercer C2009.As a second issue, the crank mechanism on a couple of window ... (cont.)

It appears these are spring-loaded and both broke. Look like 2-3/4" x 3/4" not any longer or wider (the slightly longer ones are available on Amazon, which I bought and were too long (had an overhang when slotted into window). On the Right side part on the bottom R14 98, no other markings. ... (cont.)

Need replacement

23" channel length. 9/16" wide. Need to replace 4 total due to break and loss if tension to hold window up.

Im looking for some new pivots that fit the channel balances pictured. The channels are stamped 28C and the pivots are marked 6.679.000, 4.610.108, D467.490. Can you please point me in the right direction? If you need more photos I can get those as well.

I need to replace the balances on 5 windows 28 3 CW CMC 10 printed on my balancers

Need replacement parts

Stamped 20 5 BSI. What is the correct replacement part?

I would like to replace the spring balances on some double hung vinyl tilt windows in a mobile home that is about 20 years old. The upper ones are working fine but the lowers new replacing. The channel is 3/4" wide and the window heights are either 15" or 29". Do you have anything that will work? ... (cont.)

Please help identify the window tilt latch in the pictures. Thank you Marnette