Viewing all customer Discussions for:

Other

Any chance y'all make this clip? Or a replacement?

I need rollers for this door. It is a standard size slider. House was built in 1992 and I am sure this is the original door. AFG-E 0881 1990 ----- BS6206A

Hi, I need two Certainteed Casement window cranks (pictured). are there different sizes?

Channel is 30" stamped 2940

Hi my name is Jerry and I'm searching for replacement window glaze like what's in the photos I sent you. Thank you

Missing piece that goes in handle and turns the gears

Please let me know if you have anything like this

Good evening. I purchased my bedroom furniture from Thomasville approximately 12 years ago and the drawer pull broke off recently. Does anyone know where I can find a replacement pull needed?

This glide holder mounts on a piece of wood on the back of the cabinet. The glide slides into the slot.

this is one of the balancers, the spring is stamped 7.5 31" and a number 52323.the window weighs 14.1 lbs, measured it on a scale. I believe the spring can be replaced with a 160?.I will need 4 of each part listed , just want to make sure I'm getting correct parts. parts required. 4 7.5 lb springs ... (cont.)

This is a Kingsman part. Will 32-354 work as a replacement?

Need replacement for reflectolite part #2761 patio door lock and handle.

The windows have been painted shut for years. Installed in 1954 on an addition to a 1935 Tudor Cottage. I got the paint broken way and was successful with 15. Got them open and cranks worked on all. Not sure way the last one broken. Need a replacement.The window is metal with a metal frame on a wood ... (cont.)

Need replacement for door handle side of wood door

Looks like the 16" & 24" 900 series spiral balances , 3/8"pivot shoe replaces what I need except the latches. Here are 5 pics.

Can I send pictures of this part?

Need to replace or repair 5 casement operators. They are all made by truth and are dual arm. The piece with the elbow is about 4 and 7/8 inches. the piece with the long arm has a number on it which is 41011. Is that enough information for you to identify the operator and give me a price period? I ... (cont.)

I am looking Pan Am or Look awing window vent locks. I need 16 sets, right hand and left hand pairs.

The part number above fit but had to drill new holes. Picture is the original hinge that I am looking for

I am missing a metal bar that attaches to the spring on the bottom sash. Also missing two latches for the tilt out sash. I have not been able to identify the knight/dragon logo on the latch to determine brand of window.