Viewing all customer Discussions for:

Other

Jerry @ residential window repair

This is the first of 5 pairs of windows I am fixing and need to replace all the hardware for. I need your help to identify and order the same as existing. I will send pics of the other ones in the following post.

I need to replace this window lock. Can you identify the part number? Thank you.

I am looking for coil balance replacements for double hung vinyl windows. My coils do not look like any you have available. I am unsure of the window brand. Each sash measured 28.5 wide x 29.5 h. Any assistance would be greatly appreciated. Thank you.

I bought the outer parts for the door but need the latch for inside door. Which part is that and item number to order? Thanks

Im looking for a crank gear replacement

I am looking for a replacement knob for the following piece of furniture: B533-49b Ashley Furniture Chateau Frontenac Armoire (single knob)

Hi, I am trying to find a right rear mounted bracket for a kitchen drawer. Hardware is probably 18 years old. One pic is the left side which is still intact and there are two pics of the right one, which is broken. There are no markings except the word "right". The underside of the hanging lip is .2 ... (cont.)

Looking for these brackets. Possibly off of an American Craftsman window

Truth casement window operator 30905 gray/brown

The picture of the bracket on the blue chair is broken on the bottom. You can see where the track is supposed to sit on the installed picture. I measured the end to be 1" but I can't find an exact match on your site. I can't find hanging brackets anywhere but I can't imagine you're the only manufact ... (cont.)

I need 2 of these Milgard operators. Milgard provided their part number in the attached photo. Can you help? Thanks.

Thomasville cabinet drawer slide lock broken, under mount, both left and right side. Any idea part number or where to get it?

I need the top double hung windor

The metal part is 23 inches and the with is 1/2 inch

Attached is a picture of our aluminum window circa 1973. We have replaced the spiral balances however the window frame shifts from side to side and back and forth. There is a 1/2 inch slit in the lower right and left hand corners that seemed to have had some sort of guide to prevent that. I have nev ... (cont.)

Need two hinges for a 1970 to 1980 Thomasville secretary desk.

Please see attached photo, this is from a PGT single hung window. Need this part for the spiral balance to hold in place. Thank you.

I'm not sure how to remove the old one. It is brittle and breaking into pieces.

None of my windows have weep gates and insects are getting inside