Viewing all customer Discussions for:

Other

Need 8 spring balances for old single hung window. Approx. size is 1/2" wide x 13 " long (wheeled and roped) Fasteners and clips, or complete with both end clips?

Hello, I am looking for weatherstripping on a EFCO storefront door. The backing width is .125 and the pile height is .5. Can you help me locate something similar to this. Thanks

I think one of the white plastic clips are broken. Insulated Windows look fine but Balances are all beginning to break. I hope my pics are going through. Please let my know if you need any other info. Thanks !!Vic

Hello, what is the name of this plastic piece at the top of the side of my window. I have four side pieces of this part broken

I have two different channel balances (only different in length. The first is 15 long and 1/2 wide. The second is 21 long and 1/2 inch wide. I am not positive on the ends as far as identifying them correctly. I would greatly appreciate your help I am sending pictures. I need two of each. ... (cont.)

Seeking replacements or equivalent substitution for 60s era window latches that are breaking due to sun damage.

Looking for proper identification for replacement. The picture attached shows the only marking on the old unit. The length of the metal part is slightly under 27 inches. Thanks, Kurt

This is on a Earth lite by Thermal dimensions window. Thanks for your help

The Crank system is Entrygard truth, there is a number of 40941-A but that number is different on all the windowsThe windows are Marvin but I can't find any identifying numbers other then the glass information. The house was built around 1999-2000, so I'm assuming the windows are some kind of Ultima ... (cont.)

I ordered and received part 82-078 which looks exactly like my handle but the locking mechanism does not work with the existing hardware. I would like to order the parts that go with the new handle if possible.

Parts attached to the door.

Can you please help me identify this part and availability. Thanks

looking for a match

Attached are some pictures of my lock with measurements. I believe I may need the 82-260 lock, but I want to make sure before buying it. I haven't taken it out of the door but the measurements seem to be right,

Measures 4 inches long x 1-inch width It is the part to lock an impact door. Aluminum, white

I need 4 sets of these. 2 5/8 long by 3/4 of an inch wide (does not include latch part that protrudes out).

I am looking for a 6ft closet door track per the attached photo. Color flexible. The other parts are there for reference.This was installed when the house was built in 1986. The builder only used the cheapest of the cheap materials, so if there is anything better that will work with the existing doo ... (cont.)

The only marking on hardware wheel is US Pat 4850145 THM

Window channel balance. 26" of metal. Thank you.

263KWCMC7