Viewing all customer Discussions for:

Other

The screens are 63 3/8 x 25 3/4. These are NC 2800 series double hung windows size 2062. Thanks.

Hello my name is Martin and I have a problem with this tilt window latch. Its not working and I need 2 parts can you tell me which part is the one I sent so I can order it? Thank you for your help

Right hand side window crank replacement; original Truth part# 30744D

I was wondering if you would be able to help identify the handle for a Truth sliding glass door handle. Attached are a few pictures. Thank you, Kyle

Certainteed Coil Spring Pivot Lock Shoe 1 1/16" X 1" New Style 96-C1 × 2 Simonton 3 Hole Pivot Bar 3 9/32" Die Cast 85-5003 × 2

1/4 inch is the - part of it and the round part is 1/2 inch and I need at less 8 feet

This is a broken hinge brought in by a customer.

Looking to see if there are replacement parts . It helps to keep the window balanced in the frame as you open and close the window..

These are pics of a knife latch that is off a metal framed I/G unit. The framing is about 1/2" thick and about 3/8" wide with a bubble weatherstrip around the entire inside.It is a light bronze colored frame. I am not sure of the manufactuer but I think its an Anderson or Pella. It is likely 25 or 3 ... (cont.)

We have 2 of the pella sliding glass doors that were installed at the same time. One opens right to left and the other opens left to right. The photos are from the door that opens right to left and still works. The door that opens left to right is the one with the bad latch mechanism. The lever to m ... (cont.)

There is no numbers or writing on the latch.

Door is at least 15 years old. Your recommended replacement?

Hello, I'm hoping to replace the parts for my swisco door. Including handle set, striker plate, level, lock etc. The Code: PAT-086 SPEC: NFRC Series: NC5500 MST: 6080 Can you please help me determine the parts necessary, I have located a few options on your site and need assistance please. ... (cont.)

This morning I opened a kitchen window and the left shoe pivot locked in the open position. I have removed the sash the shoe pivot appears to be broken. Regardless, it will not move up or down from its current position. Please see the attached photos. I am assuming replacement is needed. Thanks in a ... (cont.)

Hello, My window is missing a channel balance. 27 5 BSI Pm Also top guide seems to be broken. Would you be able to tell me the weight for this window and correct channel balance? Also top guide as well. Thank you, Michelle

I need to order 2 - 2040 channel balances w/ 19-038 top and 15-193 bottom. Thank you

Would like to replace the low e gas window chamber

Looking for replacement plastic retaining "L" brackets that hold the non-sliding door against the frame.

Can u advise if 39-107FK will work? If not dcan u provide me with a replacement. I need 6 color white.

Looking for these sash guides. Measurements are 5/8" bottom width, 1 1/16" top width. One screw hole. (pictured unit is broken). The one I'm looking for has a small rectangular slit in it as shown in my pictures.