Viewing all customer Discussions for:

Other

These are photos of one window in our house that will not crank shot properly. We have some that swing open right and some that swing open left. Can you tell us the replacement part numbers we would need to replace the item that is possibly stripped? I am a homeowner, but currently have a contracto ... (cont.)

I would like to replace the worn seals on 18 windows. Can you identify and source this seal?

Looking to see if there is an applicable replacement for one of these latches, can't close my window due to both latches breaking. Looked up and compared to 91-176 and all measurements appear to be equal except for the length of the plunger - if I measure from end of the plunger tip to the edge of t ... (cont.)

This broke, and I need a replacement. If possible with soft closing mechanism. Brand: Kraft Maid Mount plate # 592.393.86.00 Hinge #502.205.76.03 Head #674.305.53.00 Thank you in advance!

These are from a Philips vinyl non tilting window. The window measures 28w by 52" high. The balance is 24" overall length and 1/2" wide. It is marked "22 3 Caldwell FM"

It looks like the balance coils have snapped on both sides of my window and the shoe and housing for balance coil are the same and need to be replaced. I need assistance with parts and removal of "old" parts and installation of new. Thanks!

Need replacement for Stanley Young America dresser. Do you have the part I need, please include part no. And price. Thanks!

Do you have this casement operator arm? I need one.Chris

Need bracket on top of storm/screen door to which the chain is attached. Pin goes through chain loop and then though opening on bracket Picture on right is what it should look like.

This spring used in HURD window installed in my home in 2004 looking for replacement of substitution for this item

Left operator. Has # 30841L. Left operator also has #20810 on the underside of the operator arm.Right operator has # R30842.

I am looking for a part like this for a vintage cabinet door. The hole to hold the roller guide is 1 5/8" by 3/8"

We use this in a interior rolling door we manufacture

I have broken many of these this is the most complete one I could find it is 28 inch's long

Hello. I am looking for snap in type brick mold style window trim. Will appreciate any assistance you can provide. ThanksJim

I seem to have two different types. The one piece has 471037 on it. The two piece has 3808 on it. Bought used cabinets and can't find brand. Able to help? Will use something else that works if can't get original. Thanks, Steve

Looking for these specific parts! I am in need to replace parts for a total of 9 windows. Looking for 18 total latches and 16 total locks. The latches measurement is 2 5/8 inches width 3/8 inches in height 5/8 inches in depth The lock measurements are 2 3/4 inches in width 1 1/8 inches in depth T ... (cont.)

Need replacement hinge for kitchen cabinet. Need the exact hinge.

To whom it may concern; This is the original security mechanism that we purchased 14 years ago and are trying to find the matching component. The pics are from all sides. The screen door is listed as a "5000-Gibraltar (AD)

I need the whole mechanism. There is a 5 stamped on the coil.