Viewing all customer Discussions for:

Other

Need replacement lock for aluminum sliding window. It locks the sliding windowswhen closed. It has a sliding lock mechanism that looks like a tonge sticking out.The lock measures 2" Long1" Wide

Looking to find a replacement weather stripping for my 1995 Wenco Windows Summit Polyvinyl windows. They currently have a Q-Lon foam-core weather stripping that has become brittle and is falling appart on many of my windows.

Text me if you can get these items

Channel series: S800 Channel length: 22 Channel stamp: 21 4 Bsi 00 Quantity: 2

I am looking for a replacement for this Pella patio door bottom. As you can see, the right side of the seal is damaged.

I need brackets that goes on window s.As well the spring balancesThanksPavel

Hi,I have metal clad single hanged wood windows manufactured by Kelly Windows in Detroit, MI.Size: 33'X 99"The coil balance in several of them has shattered and need to be replaced.I have attached 3 photographs from a currently working coil balance installed in one of the windows.I am not sure which ... (cont.)

I purchased parts 84-050, 84-075, and 84-09 but they did not work. The case is 1/2" wide and 1/8" long. Are you able to recommend a replacement?

Looking for a folding replacement crank as pictured above. The only numbers clearly visible are last 4 digits 1520

The window in question is probably about 20 years old. As I bought the house 3 years ago, I have no idea of actual date or the manufacturer. In observing the operator it cranks normally to the stop. Is it the weather stripping becoming old and stiff or a worn operator,the manufacture of this is Tr ... (cont.)

Hi, I need to replace these channel guides. Its hard to see in the pic but the number on it is 286 with backwards 'C' The metal portion of the piece measures 29". It is 1/2 inch wide Would you have a replacement for these? Thanks

Hi, was wondering if you sell the Pella storm door hardware shown in the photos or similar hardware? Thanks for your help. Regard David

Hi, Im looking for your help identify the window closer below . Thank you Benny

These are the glazing strips for an aluminum bay window in a 1964 house. The strips are half an inch wide and 3/16 in tall. They are about 18 and 1/2 in Long but I'm assuming I could cut them to length. These are a gray plastic material but it is very brittle at this point.

S350-27 I may have ordered the wrong part here. Can someone help me identify the correct balance?attached are photos of the balance I needThanksKen

I need to replace Anderson L and R cranks 55003 What should I order and do I need to order the handles separately. Thank You George

Not even sure what brand of door frame this is but I would like to replace the panel with the hinges. If that's possible.

See above trying to find correct roller for two sliding patio doors. Attached are photos of rollers. It looks like your part number 81-243 is similar and believe roller is 1 1/4 inches in diameter. Found one at Home Depot but body of roller was just a bit too wide and grove on side of body was too n ... (cont.)

These are the numbers stamped into side of windows Mar 22 2007 908063. 202 0322 SUCL LOWE4V 322. (window 1) Mar 22 2007 908063. 019 0962 2UCT LOWE 352 (window 2) Mar 22 2007 908063. 004 0341 SUCL LOWE4V 341 (window 3) Are you able to supply the correct balance for these windows ? Thanks Austin ... (cont.)

Piece is 23" long. I am also missing the metal piece at the top of the window which tilts out with flat head screwdriver