Viewing all customer Discussions for:

Other

what is this latch called

Need plastic housing to hold 3coils

Do you have a replacement

ANSI 297.1-1984 SGCC 945 5/32U

I need a window channel spring ballance which is 29" long and has a number UB 28 D for the right side is an aluminum window 50" by 30" the spring has 2 white plastic clips on both ends. please give me a price for one with the shipping cost. thanks. Douglas Chin-Yee

Each side of the door has a roller-pack that contains only one roller. I know by now that each roller-pak has a main screw to hold it attached to the door and an adjustment screw. The doors must be older than 12 years (we moved into this house 12 years ago) The door frame thickness is one inch, the ... (cont.)

Eagle window screen windows. This is the upper clip.

I sent in a request earlier with photos/ I find it odd that the window shoe on the right side has an O above the cam, but upon a closer look the shoe on the left side has an upside down P just about the cam. As I said in the earlier request the show is not engaging and the cams have broken when I ... (cont.)

I need a piece like this

The cam broke on both sides as I was trying to tilt the window. These windows are from Softlite. I think there is a 0 above the metal cam. I do have replacement pivot pins, which I had to replace already. I thought that would help the window engage but the shoes are just staying at the bottom of t ... (cont.)

I think I ordered these from you 10 or 15 years ago.

I need one single guide for my glide track

33 4 GN CALDWELL 1/2 inch wide by 34 inch long swisco 380

is there any way toreplace the mirror on our closet sliding mirrored door - 24 x 78 inches. the frame and hardware are fine. debbie

Crank arm bent in hurricane need replacement

attached i a photo of the sticker on the window I am looking to repair the other picture showed, it seen the spring is no longer attached to it. Can you assist on what part i need??

New work no shelves needed just all hardware ?

One dang screw was loose so as I started to unscrew stuff to then tighten it back together... I stupidly unscrewed too much and the lock mechanism slid down inside the door. I'd (in this order) 1) take the door off/turn it upside down/get the parts out and screw it in right but can't seem to get th ... (cont.)

Need 2 rollers for glass patio door. Wheel is approximately 1" diameter. Door was likely manufactured around 2000. Thanks, Kevin

Atrium non tilt window. Thenumbers on the side are 28 3 GW CMC 7. Can you suggest a replacement balance? Thanks.