Viewing all customer Discussions for:

Other

I need replace all window rollers on my windows.. the full width from axle to axle is 1/2 inch..Need concave roller.

the lock handle I purchased is correct, its the Amesbury Truth # 82-086. but I did not order a replacement mortis lock for this unit. it seems the one currently in the door is worn out so the lock arm that comes out does not stay in the locked position when the key is turned back to remove the key. ... (cont.)

We have a milgard window and I need to replace the balancer. I have a part number ... 20-5 JX CMC 7 Do you carry the replacement for this?

The top bar is original. The bottom is replacement. It doesn't seem the replacement pin is long enough. Is this the correct replacement?

I would like to buy a channel balance

The possible brand I found is Per-Fit, Prodscorp, Indianapolis from 1961. The part is connecting the two aluminum sashes, when one sash goes up, the other goes down. The cable would be about 34 inches long with a bracket attached to both ends.

Hi there, Anyone knows how to replace damaged tilt latches of double hang windows, thanks for information.

Can you identify these ends? The pic that has 2 balances are the same part except one is broken and the other is missing the pivot piece that holds the spring

Where can I get replacement parts for this

Trying to find crank handle replacement. "Certain Tweed" vinyl window House built in 2006

I believe I need the the multi-point lock gear box. The current gear box spring has failed or come loose and the handle fails to return to the horizontal position after opening the door. I can send more photos if that helps.

Hello Swisco, Im looking for a wide snap in glazing bead. I have attached pictures. The all the way through its 1 5/8, and 1 1/4 at the line.

they are plastic with a knob on the end that pops into a metal clip that is attached to the back of the cabinet. my picture is missing the plastic knob which broke off.

I hope you can help me. I've now given up, after multiple years, on trying to get parts from Ply Gem Windows providing lifetime warranty coverage for Certainteed glass doors. I'm ready to purchase the parts from you, if you can provide them. I'll note that I will much rather pay more for exact re ... (cont.)

Looking channel balance 17inch .l need 3

Hi - I have wooden bifold doors that use paniflex hardware. I noticed that you carry a "Single Floor Guide-Product Code: 23-108". I am looking for a double floor guide replacement. On your website, I noticed that the picture above the link into the paniflex hardware listing shows a double floor guid ... (cont.)

I need to find this part

I have a Plygem window in the bedroom that has 3 opening windows in a single installed window unit. This window is original to the house and is approximately 10 -12 years old. At least 2 of the windows need new sash balances but I am willing to do all three. The one I removed is stamped 2740. Please ... (cont.)

I need to replace several Andersen balances types: R 1543/27 and L 1527/43 also listed as 9014013 and 9014012 ( Andersen product numbers).Can you tell me which of your order numbers match the Andersen numbers as listed herein?Thanks,Kevin

I'll looking for the replacement double hook lock, interior white handle, and screen door latch replacements, hopefully the photos help. Thanks