Viewing all customer Discussions for:

Other

Weatherstripping failing on 7 triple pane casement windows (34"x70") in this passive house we purchased into last year. The windows were purchased around 2010, made by Thermotech Fiberglass Fenestration (Ottawa, Canada) who are apparently no longer in business.

I attached a few pictures for reference and the small stamp is almost impossible to read but that's the best i can get . The overall measurements are 17inches x 1/2 inch wide x 3/8 deep (depth of track) . Hope this helps ! Hi , i can't seems to find the parts anywhere and think i found something c ... (cont.)

Hi,I have ordered parts from your site for some windows for one of my properties. I received amazing assistance from Kathleen in finding the right parts. I am now looking for some parts for older windows made by Milgard. I have attached a photo of the parts I need. They are some kind of spring casin ... (cont.)

Hi the springs are worn out or broken in the interior handle. I need replacement springs or a new handle.

Good Afternoon: Can you please let me know if you handle patio door track like what is shown in the attached pictures? The numbers off the door are: CTG Tempered - 106JR9081 - UV-(1) - 408(IJ)0098 Thanks for your help. Have a good day. Thank you. Mike

I have mw windows and totally mangled the balances when removing the sashes. Is that something you can help with? If so please let me know the parts and any installation tips would be appreciated. The full length of the vinyl assembly is 73.5 inches

ADDITIONAL PHOTOS

HI, Can you identify the type of pile gaskets that I need for my older (1995) Survivor windows. I think the slot is about 1/8" wide. Thanks, Len

Hi folks, was sent your way by Jeld Wen. I've four pictures of four area's that require replacement weather strips but no idea what to order. Can someone help me? These are Jeld Wen double doors. Metal clad exterior and swing inside. They are 77" tall and 35.5 inches long, 1 3/4 inches wide. I re ... (cont.)

No labels/brand names on the windows to be found. 1/2 inch tall, 17/32 inch wide. Closest match I could find (so far) is item 55-197. Thanks for the help!

Balance springs for single hung window .5" x 34"

whats a post

My current interior flush mount handle set seems to match your part #s 82-008 and 82-008K (dimensions match existing handle set exactly) but I have no slot on the exterior side. Is there a way I can add an exterior handle with lock that would work with 82-008 or 82-008K? If so, which part numbers ... (cont.)

I did a little online research, I think these are from an Anlin Coronado window. The pivot rod has a "4" on it.

Looking for the little locking handle for this sliding glass door

HII have uploaded 5 photos of the old rollers that need replacing on an old heavy glass patio door. It looks like part code No. 23-288 may be one that could work. But of course I will wait and see what you recommend to purchase. I also took 2 photos of the roller partly in the channel of the bottom ... (cont.)

I need Part#A-S3947 with roller !!! need 4

I am in need of two 26.5in long .5in wide channel balances with shoes (shoes with wings). I cant find any 1/2 sizes, I am measuring metal to metal. The only engravings on it are "26 3 BSI TO"

Upon upgrading my patio door with new handles on the interior and exterior doors I want to also replace the interior lock on the interior patio door and the door jamb receiving plate along with the exterior lock for my screen patio door. Exterior lock measuring 1 1/2 inches need to be replaced ... (cont.)

Kitchen window. Right side (from interior) open. Crank stops and gets stuck before closing. Which crank part should I order?