Viewing all customer Discussions for:

Other

I am looking for a sliding window latch that is 3 7/8 inches long and 3/8" wide. I found a part number once on your site that was 91-178 but now the site says no results found. This is for old storm windows

We have a glass shower stall from when our house was originally built in the 1980s. The seal on all the panels have become Moldy and brittle and some are missing since we bought the house. I need the replacement seals for the panels. I can only find the door seals and sweeps. Do you have a replaceme ... (cont.)

We have an Allmillmo cabinet kitchen. One of the drawer rollers has broken off and I'm in need of a replacement. Do you have such a part? With the drawer closed, it would be on the right side. It is a separate part that screws into the side rails.

I am looking for some information on where to purchase these same sash tilt corners. They are much smaller than most of the corners we use, and I can not seem to find an outlet for them.

Don't see any brand names on the window. There is 3001 imprinted on the window channel that I have included in photos. Windows were installed in the 2001 when the house was built. Having problems sliding them up and down.

Looking for a few more parts for one window. So far I have found 2 of the parts I need. Still looking for the correct parts for: Window pivot bar (the part shown in image is from a different window as the originals are rusted away completely in the other window) Window pivot bar housing (8573 853-2 ... (cont.)

Top window falls down when unlatched. Not sure what parts are needed but the piece shown here I think is broken. Can you get a two replacements? Thank you! Joe

One photos the bottom where the operator goes but I don't know what it needs. The other photo is the top of the same window. Thank you!

Tilt sash window pivot shoe is broken and metal coil is released from both sides. Window does not stay open. Have not tried to remove parts yet. Seems to be 9/16 thick and 1 1/2" high. Thanks for your help!

trying to source these strips..they have adhesive on them but they heat up and have all fallen out...over time...12 year old windows

Hello, I am trying to figure out what we need to get these windows operational (able to open and close with handle versus a pair of vice grips). iIt appears the handle and bolt (not sure what you call the piece the crank handle attached to) are stripped in need of replacement. Thank you for your hel ... (cont.)

I would appreciate a call on trying to find this replacement door handle for my patio sliding door, thank you my name is Dan thank you

Shower door handle. I need this part but my size is 2 3/4 do you have that size .

My single hung window. On the right side the piece that the spring attaches too broke so the spring won't stay attached anymore. And the string is very loose.

I have several tilt latchs that are broken. Can you match this part??

Hi - I recently bought a house that has 3 long acorn windows in the family room. Each window has the same issue. When it is opened, the top hinge is not properly securing the window as I believe there is a black plastic part that is broken on each. I suspect I need to replace that black plastic part ... (cont.)

The small knob end piece has broke off, probably need to replace the insides also. It's for my house, I actually installed this myself it is a keyed entry sliding patio door from window world bout about 15 years ago.

This is for a double casement window. Pictured is the hardware I have, I need a matching set that is handed the opposite way.

Simonton windows 0301141034 1/15/03 4681220/01 unit: 35.5. 62.5 31.5. 28.62

Having a hard time figuring it out