Viewing all customer Discussions for:

Other

I'm looking for this exact part.

The drawer manufacturer is Quality Cabinets

Could anybody help me locate these parts

Can you help me confirm that the STAINLESS STEEL MORTISE LOCK, ROUND FACE Product Code: 82-243 is the correct Mortise Lock based on the images attached? I am also purchasing LEGACY KEYED HANDLE SET, 3-15/16" (1-5/8" DOOR). Sent pics earlier.

Name Truth and number 30855 are printed on metal arm but no luck finding these online. 9 1/2 inches after the elbow. 3 inches from gear to elbow. Screw holes enter from outside and are set at 5 inches apart. Screw hole at end of park to attach to undeside of window not roller.

Can you help identify? Balance numbers 2920, 3340

I have an aluminum, vinyl coated window with a constant force spring that needs to be replaced. I am extremely handy, but I cannot figure out how to remove the sash (see photos) to identify what product I need. Also, this is a metal window and there is no cutout in the channel where i could remove t ... (cont.)

Looking for a replacement for these Brosco sash guides circa 1993. The plastic is brittle and need something close. They are 3-3/4" wide x 64-1/4 long.

Also need handles

I need four of these channel balances Channel balance - 32 4 CX CMC 7

Unfortunately, I have no idea who the manufacturer of the door is and can't find any markings on the glass or door frame.Can you help identify the handle I need?Thank you,Anna

I need 4 of these channel balances Channel balance - 26 5 CX CMC 11

Hi.Sears says no parts.Do you carry the weatherstriping...for width and height/ length of door.

We need to order a replacement latch forOur Pella doorwall. Which part should we order?Thank youAmy

Hi. I need to replace this part on a Trimline Legends DR200DH lower window pane. This part screws into the lower pane and connects to the track for sliding window up/down. See photo. Thanks, Jim Bobak

I'm looking for spring parts for several windows which are not able to open.

We are trying to locate replacements for some worn out Masterview window rollers. I have attached photos with measurements. They are badly worn and may have part of housing worn off.

Hello, I have silver line single hung tilt windows. The t-lock's are made of plastic and keep snapping. It is as if the balance string is too tight and there is too much pressure when trying to close the window fully. I would like to replace a couple balances and see if that elevates the issue. My c ... (cont.)

Can you please help me identify this part? I tried your part number 15-120 but that's not the right one.

Jeld-Wen Siteline Casement Windows. Numbers etched in glass are "NRC-B-N-877" and the precise model is given, I am told, in the following number also etched in the glass: "G0316505688097."