Viewing all customer Discussions for:

Other

One is a sash balance; the metal part is 33" The other is a connection between two shelves (just trying my luck if you have it)

The window cranks open the glass louvers. They have a black band (rubber) that is worn out on most cranks. Do you carry this version?

More pictures

The crank operator opens an Andersen window with its hinges on the right side. The operator has a folding handle and is off center. The arm that is attached is two sections. The first is smaller...about 2 inch to the hinge. The last section is about 6 plus inches and has the slide clip at the e ... (cont.)

This bead is off of an aluminum double hung window from the mid 1970's the windows have interior storm windows built into them. There's no brand or id numbers that I can locate. I would need approximately 200 feet.

U need to replace a lot of the window trim in my late 70s home in Indio (very hot summers). I have attached pics of the plastic parts and would like to know if you have any recommendations

5 inch on center holes. Looking for a replacement because mine broke but wanted to get the right one

4" length, 1 5/16" wide. One screw post. I do not have a picture of the original part, it disintegrated when my technician removed it. I only have a diagram.

I'm looking to replace the locking mechanism inside of my patio door handle. It seems to be a unique part. Any help is appreciated

This is actually from a troffler light cover --- the end broke off and smeone suggested maybe a window latch would be similar? No id on part.

Part # on back looks to be 3087 6 or 3D87 6. We just bought the house and it is seventeen years old. The same hinges are on the kitchen cabinets and the bathroom vanities.

Hi, We need to replace 10 channel balances. The model is 28" Series 371 Model 2740. Ours use a Winged Top (Part. 19-037) and Shoe with Part Number 15-005 if we are correct. What you recommend to replace the channel balances completely? If you need some photos, tell us how we have to send them. Kind ... (cont.)

.554 OD(9/16 OD); 25"length; red. I need 2 pieces and a charging tool. Could you send me your part# of replacement part?Thanks,David

Chipped handle, home depot simonton in tan

Do you carry these?

Hello I'm looking for a balances window replacement like I'm sending you in the picture. 2190 BSI LH 30 I don't know if it's possible to ship it to Spain Thanks for your time in advance David

The coils are marked 6 and #6.5 35". I weighed the window and it weighed 21.5lbs. I believe I just need the shoe and pivot bar, but I want to make sure my coil will work with the shoe. Thanks. -Steve

I need two for left and right single hung vinyl window with marking on the broken one removed, has identification on the back of the part as "13 2 JS Caldwell" they are 1/2" channels, do you have these and what's the cost? Thank you,

I need the little plastic that holds the shower door. Bottom part. Hole in the middle. One of the plastic sides broke off.

Looking to replace the rollers in my Marvin Ultimate French Slider and would appreciate any help on finding the correct part to order. Thanks in advance for your help!