Viewing all customer Discussions for:

Other

Hi Sir My shower door wheels are broken. I need four wheels or 5 wheels I uploaded photos from different angles. King glass is company name . It's photo is there too I wheels dimensions is almost 22 mm diameter around 5.5 mm thickness of a wheel. Glass thickness is approx 8 mm If u need more info ... (cont.)

Hi, looks like you guys can help me but I wanted to make certain you had all the parts. I need the balance and the shoe but I also need the metal piece that comes out of the window. That piece is a 2 1/2 inch long metal channel that is about a quarter of an inch wide and is what fits into the shoe. ... (cont.)

This handle from an old sliding door (from the 80's)has totally broken so I'm wondering if I can find a replacement? This is just one side of the handle. Although this part is broken, I think I would actually need both side to screw it on. Is it possible to get a replacement? From where? ... (cont.)

No numbers or markings.

Hello, I have several windows that only had these parts in them. None of the windows in the house have a complete system. I was wondering if you could help identify these parts. I have been told that they are from a block and tackle system. I did not see that on your website. The show measures as ... (cont.)

Looking for replacement window cranks for old aluminum windows

Described by Truth as part 40.11 and 40.12 (14011/14012).

This is a 6 foot Pella doorwall installed around 1993. The weather strip is split and needs to be replaced I haven't taken the door off yet so I don't know if it is just adhesive back or if there is a mechanical fastener. This strip seals the fixed/sliding door when it is closed. Thank you ... (cont.)

I'm replacing my sidelights. I need the bottom rubber seal for 1 3/4 inch sidelight bye 16" long.

Looking for CHANNEL BALANCE for my pull up windows. Not sure what size should I buy.

See photo of a window track with all parts intact. See another photo of parts removed: a spring and a broken plastic part. Do you have replacement parts for the spring and the broken white plastic piece (clutch)? My house was built in 1979. Inside the metal window frame between the layer ... (cont.)

Marking. h 15HD I would prefer to talk on the phone. My goal is to order channels so that when my son comes to visit that he can replace them in five windows. You have options to indicate level of expertise. Perhaps you might add something like "newbie", helpless, etc. When measuring for th ... (cont.)

Need part number

The number 1298723 is cast inside the handle. I want to make this a keyed entry. Screw holes are 3 15/16" apart. I have two doors to do this too. Outside looking in, the lock/slider is on the left. I'm comfortable making the modifications to existing hardware, just don't know what cylinder to ge ... (cont.)

l need a window opening mechanism for a 2015 Thor Chateau Super C model 35SF. The 2 metal arms about 7 1/2 inches long. I saw no markings anywhere on the mechanism.

I am searching for a tilt latch for my window. The old one has broken. I ordered 2 from you recently, but unfortunately the fit wasn't correct. That's ok, I took my chance. Would you have something like the picture below? This is what I need. Probably could work if I can get something shaped like th ... (cont.)

I'm looking to replace a set of channel balances for a single hung window The metal part measures 1/2" wide, 25.75" long It has "25 5" stamped on it, along with "BSI" and "PD" See attached picture I've also included some pictures of the plastic guides The top guide has no markings The bottom ... (cont.)

I need to replace a couple of crank handles on my casement windows. The windows were made by Certainteed and installed about 15 years ago. They are almond color. The crank assembly works fine but the handle has broken and I want to be sure that the replacement handle will fit correctly onto the he ... (cont.)

Pretty sure windows were manufactured by SNE Enterprises Inc (Mosinee, WI) and they closed down years ago. I removed the jambliner and attached photos. Let me know if you have the parts and feel to call me if you have questions. Thanks.Owen

metal part 0f channel is 23 inches x 1/2 inch wide. Number painted on metal channel: 22 5 JT CMC 4